Peavey X-Four owner manual Line select-Line, Left and right mono-switches

Page 25

stereo input module 2

features

The stereo input module can be configured to operate as either stereo or mono.When configured to operate in mono, many features are identical to those of the mono input module.

line select—Line 2

This switch determines selection of input signals from the three sets of rear panel connectors.

The channel is in LINE 1 MODE.The signals are brought in via the left and right line-input XLRs located on the rear panel.

The channel is in LINE 2 MODE.The signals are brought in via the RCA line-input connectors which are normalled through the 1/4" TRS line-input jacks. Insertion of a plug into the 1/4" jack disconnects the RCA jacks.

left and right mono-switches

These switches provide several options for configuring the stereo line- input module as a mono line-input module.

left right

Signals brought into the left and right inputs are treated as stereo throughout the module.

left right

Signals brought into the left and right inputs are summed together imme- diately before the GAIN control.The summed signal is treated as mono throughout the rest of the module.

left right

The signal fed to the left input is treated as a mono signal throughout the module. No signal from the right input is used.

left right

The signal fed to the right input is treated as a mono signal throughout the module. No signal from the left input is used.

To avoid redundancy,	+
mono features will refer

back to corresponding sec- tions on the Mono module.

Descriptions given here are specifically for the default Stereo configuration.

p. 25

Image 25

Contents Four mixing console Manual Table of contents Page Conventions Module Block diagram Panel Phantom power-+48V FeaturesPad LineMono input module High-pass filter-HPF GainModule EQ features 1mono input module Aux sends Aux send featuresAux 1-4, 5/6 pre-fader-PRE Aux stereo 5/6Panel Left-center-right-LCR Bus assignment featuresPan control MuteMono input module Mono input module Mono input module Peak indicator-PK Level meter featuresSignal level LED’s Signal present indicator-SIGMono input module Left / right assignment-L-R Mono assignment-MGroup 1-4 assignment Pre-fader listen-PFL1mono input module Rear panel features Stereo input module Line select-Line Left and right mono-switchesStereo input module Input gain-GAIN Stereo input module Equalizer-EQ on Four-band stereo EQ featuresPanel Stereo balance 5 and 6-STEREO Aux send 1-6 controls2stereo input module Balance control 2stereo input module Left/right assignment-L/R 2stereo input module Balance on-groups-BAL on 2stereo input module Line-input left and right RCA connectors Balanced left and right line-in XLR connectorsLine-input left and right 1/4TRS jacks Group module Mid frequency-MID Output eq featuresGroup module Group equalization -per output channel-EQ to Group Group module Matrix 1-2 levels-M1, M2 Matrix featuresPost-group Panel Reversing aux / group and aux / main Fader reverseAux 1-6 output level After-fader listen-AFLGroup module Mono assignment-fromgroup-MONO Group assignment featuresLeft/right assignment-fromgroup-L/R PanGroup module Signal/peak LED’s Group/aux level featuresFader Panel Group insert point Group outputGroup insert send Group insert returnLamp dim switch and DC in connector Aux insert point Auxiliary 1-6 output XLR’sAux insert send Group inputsModule Block diagram High frequency-HF Master module Left,right,mono equalization-EQ to LEFT,TO RIGHT,TO Mono Module Post-left, post-right, post-mono Left, right, and mono levels-MATRIX1-2External input levels-MATRIX1-2 Panel Master output levels-MTX1-2 Matrix output featuresMatrix 1-2 talkback-TALK to Master module Pre switch Alternate out featuresAlternate out level Sum monoMaster module Monitor-out level Monitor output featuresSolo-off Headphone levelFour Block Diagram Signal/peak LED-SIG/PEAK Left master featuresTalkback left/right-TALK to Sum left/right-SUM L/RPanel Left/center/right-LCR to Master Right master featuresRight master fader Four Block Diagram Solo on indicator Mono master featuresTalkback mono-TALK to Mono Main left/ main right-L-R to MonoPanel Talkback level Talkback featuresPink noise Talkback on-TALK onModule Block diagram Left and right monitor output jacks Left and right alternate output XLR’sMatrix 1-2 output XLR’s Left, right and mono output XLR’sModule Insert points-left, right, and mono DC power-inSpecifications Model 5A power supplyPower requirements Power supply usageSupply identification Ground linkingPower supply Redundant power supplies Console and power supply groundingMultiple power supplies in-series D7000011 10 /12 /99