8. SPECIFICATIONS
General and notes
All specifications mentioned hereafter apply to standard models only.
SONOSAX SAS SA reserves the right to modify these characteristics at any time without prior notice.
For measures and/or settings the reference is: 0dBu = 0.775V (i.e. + 6dBu = 1.55V).
Summary of characteristics |
|
|
|
|
Frequency response : | 10Hz to 200kHz ± 0.5dB |
| ||
| 20Hz to 200kHz ± 0.1dB |
| ||
Equivalent input noise : | ||||
Input gain Fixed Steps : | 60dB | 48dB | 36dB 24dB 12dB 0dB | |
Input gain Fine : | ± 20dB from CAL Position ( 40dB end to end ) | |||
Fader gain : | selectable | +12dB | or +24dB |
|
Global gain range: | fader @ | 0dB | - 20dB to | +80dB |
| fader @ +12dB | - 8dB to | +92dB | |
| fader @ +24dB | +4dB to +104dB | ||
Overall dynamic range : | 128dB |
|
|
|
Input headroom : | 24 dB |
|
|
|
Crosstalk between 2 channels : better than 100dB 10Hz to 1kHz better than 90dB 10Hz to 20kHz
Overall THD+N : |
|
|
Main Level meters: | moving coil Peak Meters | |
| internally selectable to | |
| large level scale from | |
| reading 0dB at nominal level | |
| switchable to Level and Phase Correlation meter | |
| battery level indication | |
LED's Level indicators : | red | +6dB |
| yellow | 0dB nominal level |
| green | - 10dB |
| green | - 20dB |
| green | - 40dB |
| overload indication: turns all leds ON 6dB before clipping | |
| Led level reading accuracy: ± 0.1dB | |
Nominal output level : | +6dBu or +4dBu | |
| 0dB reading on all Peak level meters reflect the nominal level | |
| An internal jumper sets the global nominal level of the entire mixer. | |
| It automatically affects the setting of all | |
| the internal 1kHz ref tone, the 0 setting of the limiters. | |
page 28 |