SV Sound SX-VT user manual Battery Power Mode SX-ST Series only, Removing the battery compartment

Page 8

2.2Battery Power Mode (SX-ST Series only)

2.2.1 Removing the battery compartment

Remove the battery pack by releasing the two slide-locks, tilting the compartment diagonally towards you and lifting it out.

IMPORTANT: Keep the slide-locks pressed towards the centre till the battery compartment is completely lifted out of the mixer.

2.2.2 Opening the battery compartment

The battery compartment may now be opened by un-tightening the screw on the left side. Remove the plastic side cover and insert 12 alkaline D-cells or 12 rechargeable Nickel-Cadmium (NiCd) or Nickel-Metal-Hydride (NiMH) batteries.

NOTE: On the left side of the battery compartment, you will find the hexagonal wrench (2 mm) which enable you to completely disassemble the SX-ST without using any other tool.

WARNING: Never leave discharged batteries in your SX-ST. Make sure that your SX-ST only contains rechargeable NiCd or NiMH batteries before charging. When using dry cells, use only professional alkaline batteries to ensure optimal autonomy. Also check the manufacture date

SX-ST / SX-SV User Manual

page 8

Image 8

Contents Sonosax SX-ST / SX-VT Audio equipment manufacturerTable of Contents LED Specifications Key Features IntroductionGeneral Description VCA and Compressor optionsInstallation Safety InstructionsOpening the battery compartment Battery Power Mode SX-ST Series onlyRemoving the battery compartment Batteries charger option for SX-ST Series only External DC Power Mode SX-ST Series onlyClosing the battery compartment Operating Instructions MIC / Line Input Module Input Select Switch Mic power switch∅ Phase reversal switch Gain ControlsLF Cut and Equalizer AUX 1 to 4 PRE/OFF/POST switches Mix busses 1 to 8 assignmentAUX Sends 1 to Dual Peak Level MetersOn Push button Channel FaderChannel Power switch SX-ST series only 13 PFL/AFL push buttonOn Air signaling SX-VT serie only Mute functionStereo Line Input Module Stereo Equalizer Left & Right Gain ControlMono selector Balance Left Right Mix busses 1/2 to 7/8 assignmentsRemote 11 PFL/AFL push button11.1 P/A LED VCAs Group Selector optional on SX-VT Series onlyChannels A/D Converter Master & Monitoring Module 1 ST / M / Low Batt switch Meters Backlight switchLeds switches MetersPFL/AFL/SOLO and operating mode Power ON/OFFTalkback/SLATE and Oscillator Returns 1 toMonitoring Communication and Private LinesGroups and Aux Master Sections General and notes SpecificationsSummary of characteristics Mic/Line inputs GainMain outputs Auxiliary outputsMonitor outputs Return InputsDimensions and weight Power requirementsOperating temperature