SV Sound SX-ST, SX-VT user manual Mic/Line inputs, Gain

Page 29

Mic/Line inputs
	Input type:	electronically balanced
	Input impedance:	6.8kΩ , linear from 10 Hz to 200 kHz
	RF filters:	standard
	Microphone power:	+48V (phantom power)
	GAIN :	60dB	48dB	36dB	24dB	12dB	0dB
	Nominal level:	-54dBu	-42dBu	-30dBu	-18dBu	- 6dBu	+ 6dBu
	Maximum input level:	-30dBu	-18dBu	-6dBu	+6dBu	+18dBu	+25dBu
	THD* ( Fader version) :
	THD* ( VCA version) :
	CMRR* @ 1kHz:	>100dB	>100dB	>100dB	>90dB	>65dB	>60dB
	CMRR* 22Hz - 22kHz:	>100dB	>100dB	>100dB	>90dB	>65dB	>60dB
	Noise LIN 22Hz - 22kHz:	-68dBu	-79.8dBu	-90.4dBu	-96.9dBu	-98.5dBu	-100.3dBu
	Equivalent Input noise :	-128dB	-127.8dB	-126.4dB	-120.9dB	-110.5dB	-100.3dB

*20 Hz to 22 kHz, at maximum input level

**Equivalent input noise from a 150 Ω source

Low frequency Filter (LF Cut) : Low frequencies Equaliser : High frequencies Equaliser : Mid sweep Equaliser :

Direct Output Level:

Insert Output Level (optional) : Insert Return Level (optional) :

Limiter :

18dB/octave, 15Hz to 400Hz

4 dB/octave, ±12dB at 80 Hz, ±15dB at 40 Hz??

4 dB/octave, ±12dB at 8 kHz, ±15dB at 16 kHz ?? 6 dB/octave, ±11dB 200 Hz to 8 kHz

internally selectable Pre EQ, Pre Fade or Post Fader +6dBu or +4dBu depending on global nominal level setting

electronically balanced, output impedance <50• typical output noise if Pre-Eq selected -130dBu

+0dBu	unbalanced, output impedance <50•
+0dBu	unbalanced, input impedance 10k•

from infinite to -30dB below internal nominal level

attack time: .......us, release time: ..ms (programm dependent?)

Compressor (VCA version) :

attack time: ..... us, release time:

ms

SX-ST / SX-SV User Manual

page 29

Image 29

Contents Audio equipment manufacturer Sonosax SX-ST / SX-VTTable of Contents LED Specifications Introduction Key FeaturesVCA and Compressor options General DescriptionSafety Instructions InstallationOpening the battery compartment Battery Power Mode SX-ST Series onlyRemoving the battery compartment Batteries charger option for SX-ST Series only External DC Power Mode SX-ST Series onlyClosing the battery compartment Operating Instructions MIC / Line Input Module Mic power switch Input Select Switch∅ Phase reversal switch Gain ControlsLF Cut and Equalizer Mix busses 1 to 8 assignment AUX 1 to 4 PRE/OFF/POST switchesAUX Sends 1 to Dual Peak Level MetersChannel Fader On Push button13 PFL/AFL push button Channel Power switch SX-ST series onlyMute function On Air signaling SX-VT serie onlyStereo Line Input Module Stereo Equalizer Left & Right Gain ControlMono selector Mix busses 1/2 to 7/8 assignments Balance Left Right11 PFL/AFL push button Remote11.1 P/A LED VCAs Group Selector optional on SX-VT Series onlyChannels A/D Converter Master & Monitoring Module Meters Backlight switch 1 ST / M / Low Batt switchLeds switches MetersPower ON/OFF PFL/AFL/SOLO and operating modeTalkback/SLATE and Oscillator Returns 1 toCommunication and Private Lines MonitoringGroups and Aux Master Sections General and notes SpecificationsSummary of characteristics Gain Mic/Line inputsAuxiliary outputs Main outputsMonitor outputs Return InputsDimensions and weight Power requirementsOperating temperature