Roland TD-8KV owner manual PD-80R/PD-80 V-Pad, Adjustment for Positional Sensing with the TD-8

PD-80R/PD-80 (V-Pad) / CY-12R/C (V-Cymbal)

PD-80R/PD-80 (V-Pad)

Before using the PD-80R and the PD-80, you need to adjust the head tension (p. 6).

Hoop (Rim)

Adjustment for Positional Sensing with the TD-8

When the TD-8 is used as the sound module, the location at which the pad is struck can be varied to produce tonal changes. In this case, it is important to adjust the head so the tension is evenly distributed, so the striking location can be detected accurately. For details on adjustments, refer to the TD-8 owner's manual.

Stand

Sensor

Head

Washer

The positional sensing function works only with TD-8’s trigger input 3 (SNARE).

Specifications

PD-80R: V-Pad

Pad Size: 8 inches

Fixing Screw

Holder

Tuning Bolt

Output Jack

Frame

Trigger: 2 (Head, Rim)

Dimensions: 245 (W) x 310 (D) x 95 (H) mm

9-11/16 (W) x 12-1/4 (D) x 3-3/4 (H) inches

Weight: 1.7 kg

3 lbs 11 oz

PD-80: V-Pad

Pad Size: 8 inches

Trigger: 1 (Head)

Dimensions: 245 (W) x 310 (D) x 95 (H) mm

9-11/16 (W) x 12-1/4 (D) x 3-3/4 (H) inches

Weight: 1.6 kg

Attaching the Pad to a Stand

Attach the PD-80R or PD-80 to a stand (MDS series).

Tighten

Loosen

Rod

Pass the rod through the pipe that is inside the holder.

When attaching the PD-80R and the PD-80 to the pad mount, be sure to tighten the stand fixing screw securely. If any of them remain loose, the pad could fall off.

3 lbs 8 oz

CY-12R/C(V-Cymbal)

Bell

Bow

Edge

BOW/BELL

Output Jack

BOW/EDGE

Output Jack

Attaching the V-Cymbal to the Cymbal Mount

Attach the CY-12R/C to the cymbal mount of a drum stand (MDS series).

1.Use the included tuning key to tighten the stopper bolt.

The stopper keeps the CY-12R/C from turning, and

10