Roland TD-8KV owner manual Connect the pads and pedals to the TD-8

Page 14

Connect the pads and pedals to the TD-8

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

	Crash
	CY-12R/C
		Ride
		CY-12R/C
	Tom 1
	PD-80	Tom 2
TD-8	Hi-Hat	PD-80
TD-8	PD-7
	PD-7
	Kick
	KD-80
	Snare
	PD-80R
Hi-Hat Control Pedal		Tom 3
	FD-6	Tom 3
	FD-6	PD-80
		PD-80

Image 14

Contents Page Page Page Additional Precautions PlacementMaintenance Getting Started Check the Contents of the BoxSetup Procedure About the Mesh Head Adjusting the Head TensionUse the included tuning key to tighten the tuning bolts KD-80 approximately 7.5 mm PD-80R/PD-80 approximately 7 mmReplaced When the Head Should BeReplacing the Head About the Lock BushingsMount the stay on the pad Setting Pads and PedalsAssembling the KD-80 BracketTighten the T-bolts to secure the legs to the stand SpecificationsAdjust the striking point for the beater Lift the KD-80 and place the stand and the four legsPD-80R/PD-80 V-Pad Adjustment for Positional Sensing with the TD-8Use the included tuning key to tighten the stopper bolt Attaching the Pad to a StandOutput Jack Corresponding Tones Sounded Play Methods Playing the CY-12R/CMovement Troubleshooting PD-7 PadFD-6 Hi-Hat Control Pedal Narrow WideConnect the pads and pedals to the TD-8 Secure the cable with cable ties Connecting the CY-12R/CAbout the Included Cables Information 03012067 ’03-5-3N