Regency IG34-NG, IG34-ULPG, IG34-LPG installation manual Conversion Kit #486-968 for NG to LPG Model

Page 10

INSTALLATION

Conversion Kit #486-968 for NG to LPG Model

THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER

IF IN DOUBT DO NOT DO THIS CONVERSION !!

Conversion Kit 486-968 Contains:

Qty. Part #

Description

1 904-345

Burner Orifice #51

1 918-273

Red "LPG" label

1918-272 Label "Converted to LPG"

1910-037 LPG Pilot Injector

1918-823 Instruction Sheet

1)Shut off the gas supply and unplug the power cord.

2)Remove the glass door, logs and lava rock.

3)Remove the rear log tray by remov- ing the 2 screws. (Log tray must be rotated to clear the burner.)

4)Remove the grate.

5)Remove the burner and ensure the aeration setting is 13 mm open.

6)Remove burner orifice with a 1/2" wrench and discard. Use a wrench to hold on to the elbow behind the orifice.

Burner

7)Reinstall new burner orifice LPG stamped #51 and tighten.

8)Apply the conversion label "This unit has been converted to ULPG" over top of the serial number decal.

9)Pull out the pilot hood by hand.

Pilot

Hood

Pilot

Hood

removed

Pilot

Orifice

10)Remove the pilot orifice with the allen key.

11)Put in the new LPG orifice with the allen key. Then put back the pilot hood.

12)Replace the yellow "NG" label with the red "ULPG" label.

13)Carefully pull out the control box.

NOTE: The control box is held in place with velcro.

14)Remove the heat shield from the control box by removing the 2 screws.

15)Remove the control box cover by undoing the 3 screws. Manoeuvre through antenna.

Antenna

Control Box

Cover

16)Remove the jumper using a plier.

Jumper Location

Jumper

Note: Aeration settings do not need to be adjusted.

17)Reverse steps 13, 12, 11, 6, 5, 4, 3 & 2.

10

Regency IG34 Gas Inbuilt Fireplace

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Manual Unit Dimensions Regency GAS Inbuilt FireplaceTable of Contents Regency Gas Fireplace Data BadgeInstallation Clearances to Combustibles Minimum Fireplace DimensionsGAS Connection Flue Liner Installation GAS Pipe Pressure TestingInstallation in Masonry or Zero Clearance Chimney Aeration Settings System Data IG34Conversion Kit #486-968 for NG to LPG Model Cable Electric Modulator Conversion Kit #486-967 for NG to Ulpg Installation Optional Stainless Steel Inner Panel Install Before you startLOG SET Installation D02-46 A02-43 C02-56 Place Front Left Log G02-44 onto the 2 front pins as shown Glass Door Installation Standard Flush Door DiagramFaceplate & Optional Plinth Trim Assembly Screen InstallationFaceplate and Door Frame Installation Thermodisc Installation Install faceplate and door frame as per previousWiring Final CheckOperating Instructions Copy of Lighting Instruction Plate Resetting the UnitNormal Operating Sounds GAS Appliances LOG Replacement MaintenanceMaintenance Instructions Door Glass ReplacementFAN Maintenance To Remove FanValve Assembly Replacement Parts List Electronic Components Parts ListMain Assembly Faceplate Assembly Warranty Warranty LifetimeSouth LINK, Dandenong South Victoria Australia

IG34-LPG, IG34-NG, IG34-ULPG specifications

The Regency IG34 series comprises three innovative models: IG34-ULPG, IG34-NG, and IG34-LPG, designed to efficiently meet the demands of modern heating solutions. These gas fireplaces are distinguished by their commitment to energy efficiency, stunning aesthetics, and robust technology.

The IG34-ULPG model is tailored for users who prefer ultra-liquid propane gas options. This model stands out with its exceptional energy efficiency, capable of heating a significant area while minimizing environmental impact. Its sleek contemporary design features a large viewing window, allowing users to enjoy the beauty of the flames while providing warmth. With the advanced remote control technology, users can conveniently adjust settings from anywhere in the room.

On the other hand, the IG34-NG variant is optimized for natural gas users, offering similar efficiency and aesthetic advantages. It also boasts an impressive BTU output, ensuring that spaces remain cozy and inviting during cooler months. The user-friendly interface makes it easy to monitor and regulate the heat output, enhancing both comfort and convenience. One of the hallmark features of the IG34-NG is its state-of-the-art safety mechanisms, including an automatic shut-off system that ensures peace of mind when the unit is not in use.

The IG34-LPG model further extends the versatility of the series by being adaptable to both liquid propane and natural gas. This model is particularly popular among users who desire flexibility, as it can easily be converted from one fuel type to another with minimal effort. Additionally, the IG34-LPG incorporates modern combustion technologies that significantly reduce emissions, making it an environmentally friendly option without compromising performance.

Across the entire IG34 series, the fireplaces are engineered with premium materials ensuring durability and reliability. The direct vent system is a standout feature, allowing for efficient ventilation that minimizes heat loss while maintaining indoor air quality. Each model is equipped with a ceramic glass door that provides excellent thermal efficiency, ensuring that users enjoy maximum warmth without excessive energy expenditure.

In summary, the Regency IG34 series—IG34-ULPG, IG34-NG, and IG34-LPG—offers a compelling blend of efficiency, safety, and modern design. These fireplaces are not just heating solutions; they are lifestyle enhancements that provide comfort and elegance to any living space, making them a smart choice for homeowners seeking stylish and effective heating options.
Top Page Image Contents