Desa Tech RFP30T installation manual VENT-FREE PROPANE/LP GAS Radiant Flame Heater

Page 1

VENT-FREE PROPANE/LP GAS

RADIANT FLAME ® HEATER

OWNER'S OPERATION AND INSTALLATION MANUAL

RFP30T

Shown with Optional Mantel

featuring Built-in Base

15,000 to 30,000 Btu/Hr with Thermostat

WARNING: If the information in this manual is not followed exactly, a fire or explosion may result

causing property damage, personal injury, or loss of life.

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electrical switch; do not use any phone in your building.

Immediately call your gas supplier from a

neighbor's phone. Follow the gas supplier's in- structions.

If you cannot reach your gas supplier, callthe fire department.

Installation and service must be performed by a qualified Installer, service agency, or the gas supplier,

WARNING: Improper instal- lation, adjustment, alter- ation, service, or mainte- nance can cause injury or property damage. Refer to this manual for correct in- stallation and operational procedures. For assistance or additional information consult a qualified Installer, service agency, or the gas supplier.

WARNING: This is an unvented gas-fired heater. It

uses air (oxygen) from the room in which it is installed.

Provisions for adequate com- bustion must be provided.

Refer to page 5 ofthis manual.

This appliance may be Installed In an aftermarket* manufactured (mobile) home, where not prohibited by state or local codes.

* Aftermarket: Completion of sale, not for purpose of resale, from the manufacturer

This appliance is only for use with the type of gas Indicated on the rating plate. This appliance is not

convertible for use with other gases.

Save this manual for future reference.

Image 1
Contents VENT-FREE PROPANE/LP GAS Radiant Flame Heater Owners Operation and Installation ManualRFP30T What to do if YOU Smell GASVENT-FREE PROPANE/LP Heater Safety InformationPoisoning may lead to death Carbon Monoxide Poisoning Early GerousProduct Product FeaturesLocal Codes UnpackingAssembling Heater AssemblyProviding Adequate Ventilation AIR for Combustion and VentilationAssembling and Attaching Brass Trim Brass TdmDetermining Fresh AIR Flow for Heater Location AIR for Combustion VentilationDetermining if You Have a Confined or Unconfined Space Tu/I-IrVentilation Air From Inside Building Ventilation AIRTo Attic SpaceInstallation Items InstallationBTU/HR Locating HeaterThermostat Sensing Bulb Installation OptionsMounting Heater to Wall Mounting Heater on Optional Hearth Base Installing Bottom Mounting ScrewsMounting Heater with Owners ManualOptional Hearth Base if Applicable To Optional MantelConnecting to GAS Supply Read Before For Your Safety I Lighting Pressure Testing Heater Gas ConnectionsOperating Heater Checking GAS ConnectionsTo Appliance To Turn OFF GASLighting ControlInspecting Burner Cleaning MaintenanceCabinet Troubleshooting Clean burner see Cleaning and Mainte Observed Problem Possible Cause RemedyTop Observed ProblemTechnical Service SpecificationsService Hints Replacement PartsParts Centrals Prestige Mantel AccessoriesIllustrated Parts Breakdown To oooo.TKEY NO. Part Number Parts ListNot a UPC Warranty InformationOsm8 Model Serial No Date Purchased