Meco 2400, 2420, 2440, 2430, 2410 owner manual Setting UP Your Grill, Standing Grill on Legs

						QTY
	PARTS LIST (CONT'D)			MODEL	MODEL	MODEL	MODEL	MODEL
ITEM	DESCRIPTION	PART #		2400	2410	2420	2430	2440
29	Heat Shield	03.6506.27	1		1	1	1	1
30	Screw, ST3.8x6mm (Heat Shield)	03.6506.28	2		2	2	2	2
31	Guide Bracket, Main Burner	03.6506.29	1		1	1	1	1
32	Screw, M4x10mm (M. Burner/S. Burner Electrode)	03.6506.30	4		4	4	4	4
33	Main Burner	03.6506.31	1		1	1	1	1
34	Wire, Main Burner Ground	03.6506.32	1		1	1	1	1
35	Nut, M4 Hex (Main Burner/Ground Wire)	03.6506.33	2		2	2	2	2
36	Piezo	03.6260.01	1		2	1	2	2
37	Electrode, Main Burner	03.6506.34	1		1	1	1	1
38	Knob, Main Burner	03.6506.35	1		1	1	1	1
39	Valve/Hose/Regulator, Main burner	03.6506.36	1		1	1	1	1
40	Level Vial	03.6506.37	1		1	1	1	1
41	Side Table Accessory	03.6506.38		All	All	All	All	All
42	Grid, Side Burner	1210.5.001	----		1	----	1	1
43	Side Burner/Table Accessory (Replacement)	1220.5.001		All	All	All	All	All
44	Cover, Side Burner/Table	03.6506.39	----		1	----	1	1
45	Knob, Side Burner	03.6506.40	----		1	----	1	1
46	Screw, M3.5x8mm Torx (Side Burner Valve)	03.6506.41	----		2	----	2	2
47	Valve Assembly, Side Burner	03.6506.42	----		1	----	1	1
48	Pin, Cotter 1.6mmx28mm (Side Burner Valve)	03.6235.00	----		2	----	2	2
49	Electrode, Side Burner	03.6506.43	----		1	----	1	1
50	Burner, Side	03.6506.44	----		1	----	1	1
51	Lantern Gas Tube	03.6506.45	----		----	1	1	1
52	Lantern	03.6506.46	----		----	1	1	1
53	Cover, Lantern Top	03.6506.47	----		----	1	1	1
54	Globe, Lantern	03.6506.48	----		----	1	1	1
55	Mantle, Lantern	03.6506.49	----		----	2	2	2
56	Screw, #10x3/4" Type 25 Csk (Lantern Knob)	03.6506.50	----		----	1	1	1
57	Knob, Lantern	03.6506.51	----		----	1	1	1
58	Screw, #4-24x3/8" Type 25 (Lantern Housing)	03.6506.53	----		----	2	2	2
59	Electrode/Piezo, Lantern	03.6506.54	----		----	1	1	1
60	Pushbutton, Lantern	03.6506.55	----		----	1	1	1
61	Lantern/Gas Tube Accessory	1230.5.001		All	All	All	All	All
62	Carry Bag Accessory	1240.5.001		All	All	All	All	All

SETTING UP YOUR GRILL

To reduce the risk of a cut or pinching injury:

·Wear protective gloves when handling parts that have sharp edges.

·When opening legs, keep hands and fingers away from the three body leg mount areas to avoid pinching. (See FIG. 2A)

STANDING GRILL ON LEGS

STEP 1) With your grill flat on the floor, release the Hood latch from the Hood Handle. (FIG. 1) Open Hood and remove any accessories from the grid that are with your model. Do not remove anything else at this step. Close and re-latch the hood.

Release Hood Latch

Level Indicator

Fig. 1

5