Lift Bowl Pan and
Burner up and out
Control Knob
Stryofoam Pads
Fig. 4B
|
|
|
|
|
|
|
| Pull hose away |
|
| FIG. 5A |
| from flange |
|
|
|
|
|
|
|
|
|
|
|
To reduce the risk of serious bodily injury or death:
·Do not load plastic side table or side burner with more than 10 lb./4.5kg (one gallon liquid/3.8L). Excess weight could tip grill over causing a fire or explosion and damage side table or side burner.
·Do not place hot utensils or cookware on plastic side table or side burner cover that can cause them to melt.
SIDE TABLE ASSEMBLY
Insert the tubular collar into the left leg PTOTM (Propane
Insert Collar into PTOTM
FIG. 4A
FIG. 4B
SIDE BURNER ASSEMBLY
STEP 1) Turn Side Burner Table upside down. (FIG. 5A) Pull the hose away from the side burner table flange. Pull threaded coupling end out of collar while feeding the hose through hole in the side of the collar. Pull the hose until the loop is taken out and hose is extended out of the collar.
(FIG. 5B)
FIG. 5B
STEP 2) Turn the Side Burner Table right side up and insert the hose end through the left leg PTOTM opening of the grill. (FIG. 5C) Push the Side Burner Table down until the collar rests on the internal stop. (FIG. 5D) Rotate the Side Burner Table back and forth slightly to make sure it is resting solidly. Do not apply excessive force.
Insert Hose
into PTOTM
FIG. 5C
|
|
|
|
7 |
| FIG. 5D |
|
|
|
|