Outdoor LP Gas Barbecue Grill Model No. GBT9080L
Assembly Instructions
1 | DO NOT RETURN PRODUCT TO STORE. |
For assistance call 1.800.762.1142 toll free. Please have | |
your owner’s manual and serial number available for |
reference.
For Easiest Assembly:
•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.
•Clear an area large enough to layout all components and hardware.
•When applicable, tighten all hardware connections by hand first. Once the step is completed go back and fully tighten all hardware.
•Follow all steps in order to properly assemble your product.
To complete assembly you will need:
•(1) Leak Detection Solution (Instructions on how to make solution are included in “Operating Instructions” section)
•(1) 14.1 oz or (1) 16.4 oz LP gas tank.
Note: You must follow all steps to properly assemble grill.
Typical assembly: approximately 30 minutes.
3 | Attach Side Handles, Heat Plate Supports and Igniter |
Assembly |
2 Attach Bottom Hinges and Locks
A | x 4 | F | x 4 |
B | x 4 | I | x 4 |
|
|
|
E x 4
4 Attach Burner and Igniter Wire
D | x 1 | I | x 4 | C | x 1 | H |
|
|
|
|
|
| |
F |
| x 4 |
|
|
| J |
x1
x1