Foster 9606801 user manual Cooker hob use, Lighting the burners

Page 16

ENGLISH

USER INSTRUCTIONS

It is mandatory to have an earth connection as per modes foreseen in the electrical system safety standards.

If using a fixed connection, it is necessary to pre-set an omnipolar interruption device on the appliance power supply line with a contacts distance that is equal to or greater than 3 mm, located in a position that can be reached easily and is in proximity of the appliance.

If using a connection with a plug and socket, verify that they are of the same type.

Avoid using reducers, adaptors or diverters because they may cause overheating or burns.

IMPORTANT: The manufacturer declines any liability for damages to persons or property, caused by the non observance of the following regulations or resulting from tampering with even a single part of the appliance.

14.Cooker hob use

14.1Lighting the burners

Before lighting hob burners, make sure that the flame spreading crowns are po- sitioned in their seat with the respective caps.

parallel and centred

tilted

Fig. 9: crown position

tilted

not centred

The new burners called "Series III" are assem- bled on certain cooker hobs. The lock system between cover (B) and flame spreading (A) guarantees perfect positioning and large cleaning ability.

Fig. 10: positioning of the series III burner

34

Image 16
Contents Abstract Table of Contents Usage warnings Position of the identification plateSafety warnings Do not Allow Children to Come Close or Play with ITKnow your appliance Flush built-in cooker hobs flush-mount edgeFor further information on cleaning see First installationPositioning in the work top Pressing it by hand Fig Cooker hob distancesFastening the cooker hob to the cabinet Accurately clean millingMilling surface Fig Once these operations have been Fixed hooks Sliding hooks Standard edge 8 mm Flush-mount edge Q4 only for S4000 seriesFixed brackets Standard edge 8 mmRoom ventilation Connection to liquid gasDischarging combustion products exhaust Adapting to different types of gassesDifferent types of gasses Cooker hob nozzle replacementCorrectly reposition the burner in its seat Adjustment of the minimum Electrical connection of the cooker hobInstructions for urban and methane gas Instructions for liquid gas LPGCooker hob use Lighting the burnersStandard burner knob Pot diameter Practical recommendations for burner useDiameter paragraph Cleaning and maintenance Cleaning the stainless steelCleaning gas components Daily ordinary cleaningTipo di bordo Fori da incassoKey Edge type4000 N7253V = 830 mm = 480 mm N7251V= 560mm = 480 mm N7254V = 1159 mm = 348 mmN7277V = 430 mm= 360 mm Quadra N7215V= 1162 mm = 351 mm N7211VN7223V = 309 mm = 454 mm N7238V= 770 mm = 840 mm = 480 mm= 480 mm N7610V = 770 mm N7615V = 560 mm N7055V-10 = 840 mmN7053V-10 = 560 mm = 480 mm = 270 mm = 480 mmLisa N7290VFaust EleonoraN7075V N7047VFT1 N7048V = 770 mm = 480 mm N7095V = 770 mm = 480 mm N7295VN7097V N7297V = 950 mm = 480 mm N7067V = 560 mm = 480 mm N7066VR145 N7063V = 420 mm = 480 mm N7367VN7266V = 560 mm = 480 mm N7065V Elettra PandoraN7024V N7044V = 740 mm = 480 mm N7021V = 740 mm = 480 mm N7023V N7042V = 560 mm AlienN7017VA Angolare 15 F2000N7038V = 560 mm = 480 mmAlfa N7052V 500 mm N7051VGN7260V N7260V = 840 mm = 480 mm