Foster 9606801 user manual Fastening the cooker hob to the cabinet, Accurately clean milling

Page 8

ENGLISH

INSTALLER INSTRUCTIONS

Accurately clean milling.

Before positioning the top, lay the sealer gasket provided on the entire

milling surface [Fig. 5].

Once these operations have been

completed, use the supplied brackets to fasten the hob to the structure. Re- fer to the “Fastening the cooker hob to the cabinet” paragraph [Page 26].

Fig. 5: positioning the insulating gasket

A constant light of at least 0.5 mm is envisioned between the external dimensions of the stainlesssteelplatformandtheinternaldimensionsoftheloweringthatmustberespected during assembly. The temperatures that develop during use of the cooker hub induce a slight elongation on the stainless steel platform, therefore, the envisioned light enables avoiding any interferences. With regard to the kitchen worktop, the temperatures induced by the cooker hub - whether in the section and on the contact top - are very contained. We recommend assembling the cooker hubs with flush-mount edge on water-repel- lent materials.

7.Fastening the cooker hob to the cabinet

Fasten the supplied hooks to the brackets under the appliance, as shown here below. The supplied hooks make it possible to fasten to a top whose thickness is between 30 and 40 mm.

IMPORTANT:

• For fastening this product to the support structure, the use of mechanical or electric screwdrivers is not recommended and only moderate pressure must be exerted by hands to the clamping parts.

The surface under the appliance must be at at least 5 mm from the bottom of it and must have an opening for passing gas and electric conduit that is at least 50x50 mm.

If this product is installed above an oven, it must be equipped with a cooling fan.

26

Image 8
Contents Abstract Table of Contents Usage warnings Position of the identification plateSafety warnings Do not Allow Children to Come Close or Play with ITKnow your appliance Flush built-in cooker hobs flush-mount edgePositioning in the work top First installationFor further information on cleaning see Pressing it by hand Fig Cooker hob distancesMilling surface Fig Once these operations have been Accurately clean millingFastening the cooker hob to the cabinet Fixed hooks Sliding hooks Standard edge 8 mm Flush-mount edge Q4 only for S4000 seriesFixed brackets Standard edge 8 mmRoom ventilation Connection to liquid gasDischarging combustion products exhaust Adapting to different types of gassesCorrectly reposition the burner in its seat Cooker hob nozzle replacementDifferent types of gasses Adjustment of the minimum Electrical connection of the cooker hobInstructions for urban and methane gas Instructions for liquid gas LPGCooker hob use Lighting the burnersStandard burner knob Diameter paragraph Practical recommendations for burner usePot diameter Cleaning and maintenance Cleaning the stainless steelCleaning gas components Daily ordinary cleaningTipo di bordo Fori da incassoKey Edge type4000 N7253V = 830 mm = 480 mm N7251V= 560mm = 480 mm N7254V = 1159 mm = 348 mm= 360 mm = 430 mmN7277V Quadra N7215V= 1162 mm = 351 mm N7211VN7223V = 309 mm = 454 mm N7238V= 480 mm N7610V = 770 mm N7615V = 560 mm = 840 mm = 480 mm= 770 mm N7055V-10 = 840 mmN7053V-10 = 560 mm = 480 mm = 270 mm = 480 mmLisa N7290VFaust EleonoraN7075V N7047VFT1 N7048V = 770 mm = 480 mm N7095V = 770 mm = 480 mm N7295VN7097V N7297V = 950 mm = 480 mm N7067V = 560 mm = 480 mm N7066VN7266V N7063V = 420 mm = 480 mm N7367VR145 N7024V N7044V = 740 mm = 480 mm Elettra Pandora= 560 mm = 480 mm N7065V N7017VA AlienN7021V = 740 mm = 480 mm N7023V N7042V = 560 mm Angolare 15 F2000N7038V = 560 mm = 480 mmAlfa N7052V 500 mm N7051VGN7260V N7260V = 840 mm = 480 mm