Foster 9606801 Cleaning and maintenance, Cleaning the stainless steel, Cleaning gas components

Page 19

USER INSTRUCTIONS

15. Cleaning and maintenance

Do not use a steam jet to clean the appliance.

Before any intervention it is necessary to disengage the appliance power supply.

Avoid leaving acid or alkaline (vinegar, lemon juice, salt, tomato juice,...) substances on the steel, grids and other parts of the appliance.

15.1 Cleaning the stainless steel

In order to properly preserve the stainless steel, it is necessary to regularly clean it after each use, once it has cooled down.

15.1.1Daily ordinary cleaning

In order to clean and preserve stainless steel surfaces, only use specific products that do not contain abrasives or chlorine based acid substances.

Usage mode: pour the product on a wet cloth and pass it over the surface, carefully rinse and dry using a soft cloth or a deerskin.

15.1.2Food stains or residue

Absolutely avoid using metal sponges and sharp scrapers to avoid damaging the sur- faces. Use normal products for steel, non abrasives, using wood or plastic material tools if needed. Carefully rinse and dry using a soft cloth or a deerskin.

We recommend using Foster Steel Clean to clean the steel; for information on where it can be obtained, contact the after-sales technical assistance centre.

Do not use chemical detergents such as oven sprays or stain removers.

15.2 Cleaning gas components

The grids, caps and flame spreading crowns are removable in order to simplify cleaning: wash then in hot water with non abrasive detergent, making sure that any crud is removed and dry them imme- diately using a cloth. Re-assemble the caps on their crowns. The cast iron components, like the grids and the burners, must never be washed in dishwashers.

For the ignition glow plugs to work correctly, the thermocouples must always be clean. Frequently check them and, if necessary, clean using a wet cloth and then dry them. Any dry residue must be removed using a wood toothpick or a needle.

Foster S.P.A. will not answer for the possible inaccuracies contained in this manual attributable to printing or transcription errors. The right is reserved to make amendments to own products considered necessary or useful, also in the interest of the utility, without jeopardising its functional and safety features.

ENGLISH

37

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Abstract Table of Contents Position of the identification plate Usage warningsDo not Allow Children to Come Close or Play with IT Safety warningsFlush built-in cooker hobs flush-mount edge Know your applianceFor further information on cleaning see First installationPositioning in the work top Cooker hob distances Pressing it by hand FigFastening the cooker hob to the cabinet Accurately clean millingMilling surface Fig Once these operations have been Fixed hooks Standard edge 8 mm Flush-mount edge Q4 only for S4000 series Sliding hooksStandard edge 8 mm Fixed bracketsConnection to liquid gas Room ventilationAdapting to different types of gasses Discharging combustion products exhaustDifferent types of gasses Cooker hob nozzle replacementCorrectly reposition the burner in its seat Instructions for liquid gas LPG Adjustment of the minimumElectrical connection of the cooker hob Instructions for urban and methane gasLighting the burners Cooker hob useStandard burner knob Pot diameter Practical recommendations for burner useDiameter paragraph Daily ordinary cleaning Cleaning and maintenanceCleaning the stainless steel Cleaning gas componentsEdge type Tipo di bordoFori da incasso Key4000 N7254V = 1159 mm = 348 mm N7253V = 830 mm = 480 mmN7251V = 560mm = 480 mmN7277V = 430 mm= 360 mm N7211V QuadraN7215V = 1162 mm = 351 mmN7238V N7223V = 309 mm = 454 mm= 770 mm = 840 mm = 480 mm= 480 mm N7610V = 770 mm N7615V = 560 mm = 270 mm = 480 mm N7055V-10= 840 mm N7053V-10 = 560 mm = 480 mmN7290V LisaN7095V = 770 mm = 480 mm N7295V FaustEleonora N7075V N7047VFT1 N7048V = 770 mm = 480 mmN7067V = 560 mm = 480 mm N7066V N7097V N7297V = 950 mm = 480 mmR145 N7063V = 420 mm = 480 mm N7367VN7266V = 560 mm = 480 mm N7065V Elettra PandoraN7024V N7044V = 740 mm = 480 mm N7021V = 740 mm = 480 mm N7023V N7042V = 560 mm AlienN7017VA = 560 mm = 480 mm Angolare15 F2000 N7038VN7260V = 840 mm = 480 mm AlfaN7052V 500 mm N7051VG N7260V
Top Page Image Contents