INSTRUCTIONS FOR CONVERTING TO NATURAL GAS
Tools required for converting from LP to NG
Screwdriver + is used for removing the screws
8mm Nut Driver is used for changing the main tube burner orifice
Screwdriver - is used for turning the Low/High Flame
14mm Wrench is used for releasing the brass adapter of flex tube
10mm Wrench is used for changing the rear burner orifice
Allen Key is used for removing the control knobs
18mm Wrench is used for fixing the side burner orifice nut (Included in package)
6.1mm Wrench is used for changing the side burner orifice (Included in package)
Adjustable Wrench
Main Burner Orifice (Included in package)
Side Burner Orifice
(Included in package)
Searing Burner Orifice
(Included in package)
Rear Burner Orifice
(Included in package)
25