Trouble Shooting continued
PROBLEM | SOLUTION | |
|
|
|
When attempting to light my grill, it will not | • | Make sure you have a spark while you are trying to light |
light immediately. |
| the burner (if no spark) |
| • Ensure that the wire is connected to the electrode | |
|
| assembly. |
| • | Clean wire (s) and / or electrode with rubbing alcohol |
|
| and a clean swab. Wipe with a clean cloth. |
| • | Check to see if the other burners operate. If so. Check the |
|
| gas orifice on the malfunctioning burner for an obstruction. |
|
|
|
Rotisserie burner will not light. | • | Check to see if debris is blocking the electrode. |
| • | Check to see if there is a spark that jumps to the burner |
|
| from the electrode. If no spark is seen, check the battery |
|
| located inside the igniter box. |
| • Does the infrared back burner light when attempting to | |
|
| light with a match ? If not, check to ensure the gas is on. |
|
|
|
Regulator makes noise. | • | Vent hose on the regulator may be plugged or regulator |
|
| may be faulty. |
| • Ensure the vent hole on the regulator is not obstructed. | |
|
| Clear the hole, close the gas control valves. Wait ten |
|
| minutes and |
| • Check your flames for proper performance. If the flames | |
|
| are not correct, replace regulator. |
|
|
|
Full size cover does not fit the grill. | • | Cover may be incorrect for your grill. It may be a tight fit. |
|
| Ensure the cover is the correct length for your grill. |
|
| Measure it left to right. Compare to the grill’s |
|
| measurement. |
| • | Compare the location and size of the hood portion of the |
|
| cover to your grill. |
| • | Spread the cover and allow it to relax, preferably in warm |
|
| sunlight or in a warm room. |
| • | For grill with a side shelf bunch the cover like a sock, put |
|
| on left to right. |
|
|
|
37