Nexgrill 720-0600 operating instructions Ordering Parts, Grill Hints

Page 42

HOW TO ORDER REPLACEMENT PARTS

To make sure you obtain the correct replacement part(s) for your gas grill, please refer to the parts list on page 30-31. The following information is required to assure getting the correct part.

•Gas grills model number (see data sticker on grill).

•Part number of replacement part needed.

•Description of replacement part needed.

•Quantity of parts needed.

To obtain replacement parts, contact the dealer from which products was purchased. If dealer service is not available, contact: Nexgrill Industries, Inc. customer service

1-866-984-7455

Ordering Parts

IMPORTANT

Use only factory authorized parts. The use of any part that is not factory authorized can be dangerous. This will also void your warranty.

Keep this assembly and operating instruction manual for convenient referral, and for replacement parts ordering.

CAUTION

Gas valves are present at the factory (valve assembly will be marked accordingly). If you wish to convert at some later date, be sure to contact your gas supplier or grill dealer before making the conversion.

Different orifices must be installed when converting from one type of gas to another. You will also need a data plate indicating what type of gas is used by the grill.

Grill Hints

The doneness of meat, whether rare, medium, or well done, is affected to a large degree by the thickness of the cut. Expert chefs say it is impossible to have a rare doneness with a thin cut of meat.

The cooking time is affected by the kind of meat, the size and shape of the cut, the temperature of the meat when cooking begins, and the degree of doneness desired.

When defrosting meats it is recommended that it be done overnight in the refrigerator as opposed to a microwave. This in general yields a juicier cut of meat.

Use a spatula instead of tongs or a fork to

turn the meat, as a spatula will not puncture the meat and let the juices run out.

To get the juiciest meats, add seasoning or salt after the cooking is finished on each side and turn the meat only once (juices are lost when the meat is turned several times). Turn the meat just after the juices begin to bubble to the surface.

Trim any excess fat from the meat before cooking. To prevent steaks or chops from curling during cooking, slit the fat around the edges at 2-inch intervals.

DO NOT LEAVE THE GRILL UNATTENDED WHILE COOKING.

42

Image 42
Contents Assembly & Operating Instructions K20Y07P-1Table of Contents Safety InstructionSafety Instruction Grill Installation Codes Proper Placement and Clearance of Grill LP-Gas Supply SystemRotisserie Drive Motor Insect WarningSafety Instruction Assembly Instruction Assembly Instruction Assembly Instruction Cylinder Tank Fixed Assembly Instruction GAS HOOK-UP Gas Hook UpTank Requirement ConnectionInstaller Final Check List USER, Please Retain this Manual for Future ReferenceLeak Testing Your grill is ready to use Operating Instruction Grill Lighting Instruction Flame Characteristics Lighting Illustration Step to light the Rotisserie BurnerTo Match the Light Grill Motor Instruction To USE Motor SAFELY, Please Read Warning Prior to USEConverting to Natural GAS Orifice Chart Converting to Natural GASInstructions for Converting to Natural GAS GAS Conversion Searing Burner Conversion Side Burner Conversion Rear Burner Conversion For Main tube burner and Side burner Conversion Only NG Hose and Regulator Conversion GAS Conversion Care and Maintenance Care and Maintenance Trouble Shooting Spider and Insect WarningCooking Temperatures Problem Solution Required Grill is in a windy location Explode View Part List REF# Description QTYREF# Description QTY Ordering Parts Grill HintsGrill Cooking Chart VegetablesPoultry Grill Recipe Suggestion Beef and Lamb Kabobs Vegetable KabobsFajitas Eggplant CaviarPork Roast Chicken Tandoori StyleSpare Ribs Turkey