Zenoah EDG2300 manual Stopping Engine, Boring Operation, Adjustment of Idling Speed

Page 13

Operation

■STOPPING ENGINE

•Release the throttle lever and press on the red button until the engine comes to a complete stop.

Stop button

■BORING OPERATION

•Keep the engine running at full throttle during operation.

•Keep the drill going straight. Tilted boring can cause the drill to bend.

•Avoid touching the spark plug lead during operation.

■ADJUSTMENT OF IDLING SPEED

•The engine idling speed is preadjusted at the factory so that the engine keeps running without moving the drill when releasing the throttle lever to the idling position. However, due to changes in engine conditions, it may be necessary to adjust the idling.

•To increase idling, screw idle adjustment screw in, until preferred speed is obtained. To decrease idling, unscrew idle adjustment screw until preferred speed is obtained.

Idle adjustment screw

13 

Image 13

Contents EDG2300 Safety First Contents  4  Safety PrecautionsWork Gear and Clothing Avoid Noise Problem Things to Check Before Using Your Portable GAS DrillThings to Check Before Starting UP the Engine  7  Important Engine Information Emission Control LabelSetup Parts Location & SpecificationsModel EDG2300 Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL For Your Engine LIFE, Avoid Fueling the UnitStarting Engine OperationStopping Engine Adjustment of Idling SpeedBoring Operation Maintenance Chart MaintenanceDaily Inspection Inspection Every 25 HoursInspection Every 100 Hours Disposal StorageBefore LONG-TERM Storage Parts List Drive Unit and Tools S/N 901112 and up Parts List EDG2300EDG2300  20   21  Limited Warranty Garantie limitée Zenoah AMERICA, INC