Safety Precautions
■NOTES ON CARE AND MAINTENANCE OF YOUR PORTABLE GAS DRILL
•In order to maintain your portable gas drill in proper working order, perform the maintenance and checking operations described in this manual at regular intervals. In the event that any parts must be replaced or any maintenance or repair work not described in this manual must be
performed, please contact a representative from the store nearest RedMax authorized servicing dealer for assistance.
•Under no circumstances should you ever take apart the portable gas drill or alter it in any way. Doing so might result in the portable gas drill becoming damaged during operation or the portable gas drill becoming unable to operate properly.
•Always be sure to turn off the engine before performing any maintenance or checking procedures.
•When removing, or reattaching the drills, be sure to wear thick, sturdy gloves and use only proper tools and equipment to prevent injury.
•When replacing drills or any other parts or when replacing the oil or any lubricants, always be sure to use only RedMax products or products which have been certified by RedMax for use with the portable gas drill.
•Do not use any accessory or attachment other than those bearing the RedMax mark and recommended for the unit.
Emission Control Label
IMPORTANT ENGINE INFORMATION
THIS ENGINE CONFORMS TO U.S. EPA
PH1 FOR SMALL
ENGINE FAMILY : 7KZXS.0254CD ; EM*1
ENGINE DISPLACEMENT : 23cc
REFER TO OWNER'S MANUAL FOR MAINTE- NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
USE JASO FC OR ISO EGC GRADE 50:1 OIL.
ZENOAH CO.,LTD.
*1: The initial number will be changed every year of manufacturing.
Information du moteur importante
Ce moteur est conforme aux reglements U.S. EPA PH1 pour les petits moteurs du offroad.
Type de moteur : 7KZXS.0254CD ; EM*1
Cylindree du moteur : 23cc
Se fererer au manuel de l'utilisateur pour les specifications d'entretien et les reglages.
FABRIQUE PAR:
Utilise JASO FC ou ISO EGC 50:1 Huile.
ZENOAH CO.,LTD.
*1: Le nombre initial changera chaque année de la fabrication.
8