Zenoah EDG2300 manual Disposal, Before LONG-TERM Storage

Page 16

Storage

•Drain fuel tank and run engine out until all fuel in the carburetor is used up.

•Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.

Pull starter until compression is felt.

•Brush off dirt from the drill surface and apply rust protective oil.

•Store the machine in a dry, dust-free place.

•When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.

16 

Image 16

Contents EDG2300 Safety First Contents Safety Precautions  4 Work Gear and Clothing Avoid Noise Problem Things to Check Before Using Your Portable GAS DrillThings to Check Before Starting UP the Engine  7  Emission Control Label Important Engine InformationSetup Parts Location & SpecificationsModel EDG2300 Fuel HOW to MIX FuelRecommended Mixing Ratio Gasoline 50OIL Fueling the Unit For Your Engine LIFE, AvoidOperation Starting EngineStopping Engine Adjustment of Idling SpeedBoring Operation Maintenance Maintenance ChartDaily Inspection Inspection Every 25 HoursInspection Every 100 Hours Disposal StorageBefore LONG-TERM Storage Parts List Parts List EDG2300 Drive Unit and Tools S/N 901112 and upEDG2300  20   21  Limited Warranty Garantie limitée Zenoah AMERICA, INC