Zenoah EDG2300 manual Work Gear and Clothing

Page 5

Safety Precautions

WORK GEAR AND CLOTHING

When using your portable gas drill, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles.

Always be sure to wear and helmet and face protector when using your portable gas drill.

When using your portable gas drill, always be sure to wear thick work gloves to protect your hands and non-slip-sole work boots to prevent you from slipping. Never use your portable gas drill when wearing pants with loose cuffs, when wearing sandals, or when barefoot.

When using your portable gas drill for an extended period of time, you should wear ear protectors to protect yourself from loss of hearing from overexposure to high levels of sound.

WARNINGS CONSIDERING HANDLING OF FUEL

The engine of the portable gas drill is designed to run on a mixed fuel which contains highly flammable gasoline. This fuel is highly flammable and you should never store cans of fuel or refill the tank of the portable gas drill in any place where there is a boiler, stove, wood fire, electrical sparks, welding sparks, or any other source of heat or fire which might ignite the fuel.

Smoking while operating the portable gas drill or refilling its fuel tank is extremely dangerous. Always be sure to keep lit cigarettes away from the portable gas drill at all times.

When refilling the tank always turn off the engine first and take a careful look around to make sure that there are no sparks or open flames anywhere nearby before refueling.

If any fuel spillage occurs during refueling, always be sure to use a dry rag to wipe any fuel which has been spilled onto the portable gas drill before turning the engine back on again.

After refueling, screw the fuel cap back tightly onto the fuel tank and then carry the portable gas drill to a spot 10feet (3m) or more away from where it was refueled before turning on the engine.

5

Image 5
Contents EDG2300 Safety First Contents  4  Safety PrecautionsWork Gear and Clothing Things to Check Before Starting UP the Engine Things to Check Before Using Your Portable GAS DrillAvoid Noise Problem  7  Important Engine Information Emission Control LabelModel EDG2300 Parts Location & SpecificationsSetup Recommended Mixing Ratio Gasoline 50OIL HOW to MIX FuelFuel For Your Engine LIFE, Avoid Fueling the UnitStarting Engine OperationBoring Operation Adjustment of Idling SpeedStopping Engine Maintenance Chart MaintenanceDaily Inspection Inspection Every 25 HoursInspection Every 100 Hours Before LONG-TERM Storage StorageDisposal Parts List Drive Unit and Tools S/N 901112 and up Parts List EDG2300EDG2300  20   21  Limited Warranty Garantie limitée Zenoah AMERICA, INC