Fisher & Paykel CAD-48, CAD-30, CAD-36 manual Finger tight first, then use a wrench

INSTALLATION

SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)

6.Set the Side Burner/Sink securely on a table and attach the faucet to the sink as shown in

Fig. 36.

CAUTION:

Finger tight first, then use a wrench.

Rubber Washer

Lock Washer

Lock Nut

7.Feed the 3-foot water supply hose/air vent tube through the hole at the bottom of the burner box, and attach it to the faucet (Fig. 37).

CAUTION:

Finger tight first, then use a wrench.

Fig. 36

AIR VENT

TUBE

Fig. 37

8. Perform the following instructions for head installation:

WARNING!

Excessive weight hazard. Use two or more people to move and install sink/burner assembly onto the cart.

OUTDOOR APPLIANCE HEAD PREPARATION:

A. First you will need to remove the angle brackets from the side of the unit and replace them with cart mount brackets (Fig. 38). Unit is shipped prepared for island installation.

SCREWS

Fig. 38

13