Fisher & Paykel CAD-30, CAD-48, CAD-36 manual Tank Bracket Snap-lock Clip Bushing

INSTALLATION

SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)

NOTE:

Remove all racks and drawers from the cart and grates. And remove burner caps and drip tray from the Side Burner/Sink prior to kit installation.

1.Attach tank bracket on the right side of the cart as shown in Fig. 29.

2.Install the snap bushing in the center divider and the snap-lock clip in the back bottom of the cart into the hole provided, as shown in Fig. 30 and 31. Note the direction of installation.

3.Attach sink drain hose assembly to the tank as shown in Fig. 32a, 32b and 32c (include one tailpiece washer).

Tank Bracket

Fig. 29

Snap-lock Clip

Bushing

Fig. 30

Washer

Sink Drain Hose

Assembly

Fig. 31 Fig. 32a

Fig. 32b

Tank

Drain

Hose

Fig. 32c

11