Fisher & Paykel CAD-48, CAD-30, CAD-36 manual Front End Screw Installation

INSTALLATION

CART ASSEMBLY INSTRUCTIONS

3.Position tabs on side bracket to fit into slots on the cart (be aware of pinch points)(Fig. 10 -12). When complete, the landing ledge should sit flush on the top of the cart (no gap).

4.Secure the head to rear of cart (Fig. 13) with Phillips-head screws provided (10-24 x 1/2”).

PINCH POINT

Fig. 10 Fig. 11 Fig. 12

Fig. 13

STEP 4

Front End Screw Installation

1.Install remaining screws (10-24 x 1/2”) into the front of head to the cart (Fig.14).

2.Slide drip tray/pan back into place.

Fig. 14

7