Fisher & Paykel CAD-36, CAD-48, CAD-30 manual Pinch Point

INSTALLATION

SINK DRAIN ASSEMBLY INSTRUCTIONS (OPTIONAL)

C. Position tabs on side bracket to fit into slots on the cart (be aware of pinch points)(Fig. 44-45). When complete, the landing ledge should sit flush on the top of the cart (no gap)(Fig. 46).

D. Secure the head to rear of cart (Fig. 47) with (2) Phillips-head screws provided (10-24 x 1/2”).

E.Install remaining (3) screws (10-24 x 1/2”) into the front of head to the cart (Fig. 48).

Fig. 44

PINCH POINT

Fig. 45 Fig. 46

Fig. 47 Fig. 48

15