KitchenAid KBZU122VSS Electrical Requirements, Gas Supply Requirements, Recommended Ground Method

Page 10

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Check with a qualified electrician if you are not sure whether the side burner is properly grounded.

A120-volt, 60-Hz, AC-only, 15-amp, fused electrical supply is required.

It is recommended that a separate circuit servicing only this side burner be provided.

To avoid electrical shock, do not immerse cord or plugs in water or other liquid.

Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.

Do not operate any outdoor cooking gas appliance with a damaged cord, damaged plug, or after the appliance malfunctions or has been damaged in any manner. Contact the manufacturer for repair.

Do not let the cord hang over the edge of a table or touch hot surfaces.

Do not use an outdoor cooking appliance for purposes other than intended.

When connecting, first connect plug to the outdoor cooking gas appliance then plug appliance into the outlet.

Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking gas appliance.

Do not remove the ground prong or use with an adapter of 2 prongs.

The model/serial number rating plate is located on the right-hand side panel. See the following illustration.

A

A. Model/serial number plate

Recommended Ground Method

The outdoor side burner, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code ANSI/NFPA 70, or Canadian Electrical Code, CSA C22.1.

Copies of the standards listed above may be obtained from:

CSA International

8501 East Pleasant Valley Rd.

Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

B

A

C

A. 3 prong ground plug

B. 3-prong polarized type outdoor GFI outlet

C. Ground prong

Gas Supply Requirements

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

Observe all governing codes and ordinances.

IMPORTANT: This installation must conform with all local codes and ordinances. In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223.1 - latest edition or CAN/CGA B149.1 - latest edition.

IMPORTANT: The side burner must be connected to a regulated gas supply.

Refer to the model/serial rating plate for information on the type of gas that can be used. If this information does not agree with the type of gas available, check with your local gas supplier.

10

Image 10
Contents Outdoor BUILT-IN Dual Side Burners Table DES Matières Outdoor BUILT-IN Side Burner Safety Your safety and the safety of others are very importantImportant Safety Instructions Lb LP Gas Models KBZU122VSS00 Tools Needed Installation RequirementsTools and Parts Parts SuppliedProduct Dimensions Location RequirementsCabinet Dimensions Maker IceBetween a Trash Drawer, Utility Drawer, or Warming Drawer Built-in Outdoor Grill Enclosure Ventilation for LP Gas Gas Supply Requirements Electrical RequirementsRecommended Ground Method Gas Connection Requirements Natural Gas Conversion LP Gas Conversion Using a Local LP Gas SupplyNatural Gas Install Tank Tray for20lb LP Gas FuelTank Installation InstructionsBuilt-inOutdoor Side Burner Installation LP Gas Conversion Using a 20 lb LP Gas Fuel TankTo Install the 20 lb LP Gas Fuel Tank Make Gas ConnectionGas Connection to Natural Gas or Local LP Gas Plug in Side BurnerAssemble Cooking Area Tools and Parts forGas Conversion Installation of the regulatorGAS Conversions Conversionto aLocal LP Gas SupplyMake Side Burner Connections Connect Local LP Gas Supply Conversion from LP Gasto Natural GasRecord Conversion Hook up to Natural gas and Leak Test Check and Adjust theBurnersChange the Side burner orifices Using Your Outdoor Side Burner Lighting Your SideBurnerOutdoor Side Burner Care General CleaningCleaning Method Manually lighting the side burnerIf you need replacement parts TroubleshootingAssistance or Service Nothing will operateTheU.S.A Kitchenaid Outdoor Product WarrantyAccessories CanadaItems Excluded from Warranty This limited warranty does not coverSécurité DU Brûleur Latéral Encastré Dextérieur Votre sécurité et celle des autres est très importanteConservez CES Instructions Pièces fournies Exigences DinstallationOutillage et pièces Pièces nécessairesDimensions du placard ExigencesdemplacementDimensionsdu produit AllumagePlan Dimension C Dimension D Dimension E Dimensions de louverture à découper Portes daccès encastrées Taille de la porte Dimension F Dimension LSpécifications électriques Méthode recommandée de mise à la terreSpécifications delalimentation en gaz Puissance thermique des brûleurs en altitude Exigences concernantle raccordement au gazDétendeur Test de pressurisation de la canalisation de gazConversion pour lalimentation au gaz naturel Exigences concernantleraccordement au gaz Instructions ’INSTALLATIONInstallationdubrûleurlatéral dextérieur Encastré Gaz naturelInstallation du chariot de bouteille de gaz propane de 20lb Raccordement de gaz Installation de la bouteille de propane de 20 lbRaccordement à une bouteille de gaz propane de 20 lb Alimentation au gaz naturel ou au gaz propane local Branchement du brûleur latéralOutillageetpièces Installation de la zone de cuissonConversions DE GAZ Outils nécessairesInstallation du détendeur Conversion au gaz propanelocalConversion degaz propaneàGaznaturel Enregistrer la conversionRaccordement au gaz naturel et recherche des fuites Remplacement des gicleurs du brûleur latéralContrôle et réglagedes brûleurs Enregistrement de la conversionPréparation de l’alimentation en gaz AllumagedubrûleurlatéralOuvrir larrivée de gaz Allumage manuel du brûleur latéral Entretien DU Brûleur Latéral DextérieurNettoyage général Méthode de nettoyageDépannage Rien ne fonctionneAccessoires Assistance OU ServiceAu Canada Garantie DES Produits Pour Usage Extérieur Kitchenaid La présente garantie limitée ne couvre pasW10176789B All rights reserved
Related manuals
Manual 48 pages 54.09 Kb

KBZU122VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.