Using Your Outdoor Side Burner

Low Flame Adjustment

If flame goes out on the “LO” setting, the low flame setting must be adjusted.

1.Turn off the valve and wait until burners are cool.

2.Light side burner using information in the “Outdoor Side Burner Use” section.

3.Turn burner to its lowest setting and remove knob.

4.Hold valve stem with pliers and insert a small flat-blade screwdriver into the shaft.

5.Watch the flame and slowly turn the screwdriver counterclockwise.

6.Adjust flame to minimum stable flame.

A. Valve stem

B.Small flat-blade screwdriver

C.Pliers

7.Replace the control knob and turn off the burner.

8.Repeat steps 3 through 7 for each burner if needed.

Inspect the LP Gas Fuel Tank Supply Hose

Inspect the gas pressure regulator/hose assembly before each use.

1.Open the cabinet door and slide 20 lb LP gas fuel tank out.

2.Inspect the entire gas pressure regulator/hose assembly for cuts, abrasions, or excessive wear.

3.If necessary, replace the gas pressure regulator/hose assembly before using the side burner.

Contact the dealer and use only replacement hoses specified for use with the side burner.

A. Gas pressure regulator/hose assembly

Prepare the Gas Supply

1.Remove outdoor side burner cover.

2.Make sure the control knobs are all turned to the OFF position.

Turn the Gas Supply On

1.For outdoor side burners using a 20 lb LP gas fuel tank: Slowly open the tank valve.

NOTE: If flow limiting device activates, your side burner may not light. If your side burner does light, the flames will be low and will not heat properly. Turn 20 lb LP gas fuel tank valve and all control knobs off and wait 30 seconds. After shutting off the 20 lb LP gas fuel tank, very slowly open tank valve and wait 5 seconds before lighting.

2.For outdoor side burners using gas supply source other than

20 lb LP gas fuel tank:

Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

Lighting Your SideBurner

WARNING

Burn Hazard

Do not let the burner flame extend beyond the edge of the pan.

Doing so can result in burns.

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

1.Remove the side burner cover. Do not light burners with the cover on.

2.Do not lean over the side burner.

3.Push in and turn the control knob to LITE/HI and hold in.

4.You will see the igniter glow. When burner is lit, release the knob. Turn knob to desired setting.

5.Repeat for the other burner as needed.

IMPORTANT: If burner does not light immediately, turn the burner knob to OFF and wait 5 minutes before relighting.

KBZU122VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.