KitchenAid KBZU122VSS Gas Connection to Natural Gas or Local LP Gas, Plug in Side Burner

Page 15

5.Screw the gas pressure regulator/hose assembly to the 20 lb LP gas fuel tank as shown. (To disconnect, turn off the gas supply to the 20 lb LP gas fuel tank, then unscrew the gas pressure regulator/hose assembly from the 20 lb LP gas fuel tank as shown.)

connect

disconnect

B

A

A. 20 lb LP gas fuel tank

B. Gas pressure regulator/hose assembly

6.Turn on the gas supply. Wait a few minutes for gas to move through the gas line.

7.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

8.Slide tank tray back into the cabinet.

9.Go to “Plug in Side Burner” in this section.

Gas Connection to Natural Gas or Local LP Gas

WARNING

Explosion Hazard

Use a new CSA International approved “outdoor” gas supply line.

Securely tighten all gas connections.

If connected to LP, have a qualified person make sure gas pressure does not exceed 11” (28 cm) water column.

Examples of a qualified person include:

licensed heating personnel,

authorized gas company personnel, and authorized service personnel.

Failure to do so can result in death, explosion, or fire.

This installation must conform with local codes and ordinances. In the absence of local codes, installations must conform with either the National Fuel Gas Code ANSI Z223.1 - latest edition, or CAN/CGA-B149.1 Natural Gas and Propane installation code.

Copies of the standards listed above may be obtained from:

CSA International

8501 East Pleasant Valley Rd.

Cleveland, Ohio 44131-5575

National Fire Protection Association

One Batterymarch Park

Quincy, Massachusetts 02269

1.Make gas connections.

A combination of pipe fittings must be used to connect the side burner to the existing gas line.

If local codes permit, use an outdoor flexible stainless steel tubing gas connector, design-certified by CSA International, to connect the side burner to the rigid gas supply line. A ⁵⁄₈" diameter line is recommended. Using a wrench to tighten, connect the gas supply to the side burner. Use pipe-joint compound on all non-flared male threads. Do not kink or damage the flexible connector when moving the side burner.

Pipe-joint compounds suitable for use with LP gas must be used. Do not use TEFLON®† tape.

A

B

C

A. New CSA International approved “outdoor” flexible gas supply line

B. Rear of side burner

C. To Natural gas or Local LP gas supply

2.Open the manual shutoff valve in the gas supply line. The valve is open when the handle is parallel to the gas pipe.

A

B

A. Closed valve

B. Open valve

3.Test all connections by brushing on an approved noncorrosive leak-detection solution. Bubbles will show a leak. Correct any leak found.

Plug in Side Burner

NOTE: This built-in outdoor side burner comes with a large 2,085 mAmp power transformer/plug assembly for the side burner igniters. Follow the instructions for plugging in and mounting the power transformer. Keep any electrical supply cord away from any heated surfaces.

†®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company.

15

Image 15
Contents Outdoor BUILT-IN Dual Side Burners Table DES Matières Your safety and the safety of others are very important Outdoor BUILT-IN Side Burner SafetyImportant Safety Instructions Parts Supplied Installation RequirementsTools and Parts Lb LP Gas Models KBZU122VSS00 Tools NeededLocation Requirements Product DimensionsMaker Ice Cabinet DimensionsBetween a Trash Drawer, Utility Drawer, or Warming Drawer Built-in Outdoor Grill Enclosure Ventilation for LP Gas Electrical Requirements Gas Supply RequirementsRecommended Ground Method Gas Connection Requirements LP Gas Conversion Using a Local LP Gas Supply Natural Gas ConversionNatural Gas LP Gas Conversion Using a 20 lb LP Gas Fuel Tank Installation InstructionsBuilt-inOutdoor Side Burner Installation Install Tank Tray for20lb LP Gas FuelTankMake Gas Connection To Install the 20 lb LP Gas Fuel TankPlug in Side Burner Gas Connection to Natural Gas or Local LP GasAssemble Cooking Area Conversionto aLocal LP Gas Supply Installation of the regulatorGAS Conversions Tools and Parts forGas ConversionConversion from LP Gasto Natural Gas Make Side Burner Connections Connect Local LP Gas SupplyRecord Conversion Check and Adjust theBurners Hook up to Natural gas and Leak TestChange the Side burner orifices Lighting Your SideBurner Using Your Outdoor Side BurnerManually lighting the side burner General CleaningCleaning Method Outdoor Side Burner CareNothing will operate TroubleshootingAssistance or Service If you need replacement partsCanada Kitchenaid Outdoor Product WarrantyAccessories TheU.S.AThis limited warranty does not cover Items Excluded from WarrantyVotre sécurité et celle des autres est très importante Sécurité DU Brûleur Latéral Encastré DextérieurConservez CES Instructions Pièces nécessaires Exigences DinstallationOutillage et pièces Pièces fourniesAllumage ExigencesdemplacementDimensionsdu produit Dimensions du placardPlan Dimension C Dimension D Dimension E Taille de la porte Dimension F Dimension L Dimensions de louverture à découper Portes daccès encastréesMéthode recommandée de mise à la terre Spécifications électriquesSpécifications delalimentation en gaz Test de pressurisation de la canalisation de gaz Exigences concernantle raccordement au gazDétendeur Puissance thermique des brûleurs en altitudeConversion pour lalimentation au gaz naturel Gaz naturel Instructions ’INSTALLATIONInstallationdubrûleurlatéral dextérieur Encastré Exigences concernantleraccordement au gazInstallation du chariot de bouteille de gaz propane de 20lb Installation de la bouteille de propane de 20 lb Raccordement de gazRaccordement à une bouteille de gaz propane de 20 lb Branchement du brûleur latéral Alimentation au gaz naturel ou au gaz propane localOutils nécessaires Installation de la zone de cuissonConversions DE GAZ OutillageetpiècesConversion au gaz propanelocal Installation du détendeurEnregistrer la conversion Conversion degaz propaneàGaznaturelEnregistrement de la conversion Remplacement des gicleurs du brûleur latéralContrôle et réglagedes brûleurs Raccordement au gaz naturel et recherche des fuitesAllumagedubrûleurlatéral Préparation de l’alimentation en gazOuvrir larrivée de gaz Méthode de nettoyage Entretien DU Brûleur Latéral DextérieurNettoyage général Allumage manuel du brûleur latéralRien ne fonctionne DépannageAssistance OU Service AccessoiresAu Canada La présente garantie limitée ne couvre pas Garantie DES Produits Pour Usage Extérieur KitchenaidAll rights reserved W10176789B
Related manuals
Manual 48 pages 54.09 Kb

KBZU122VSS specifications

The KitchenAid KBZU242VSS, KBZU122VSS, KBZU122TSS, and W10176789A are a series of impressive kitchen appliances designed to enhance your culinary experience. These products appeal to both amateur and professional chefs due to their innovative features, advanced technologies, and sleek design.

The KBZU242VSS is a built-in refrigerator that offers an impressive combination of style and functionality. It boasts a spacious capacity optimized for convenient organization. The design includes adjustable glass shelves and a customizable door bin system, allowing you to create a layout that suits your storage needs. One of its standout features is the ExtendFresh technology, which ensures that all your food items are stored at the ideal temperature to maintain freshness.

Next, the KBZU122VSS is known for its compact size, making it perfect for smaller kitchens or as an additional cooling solution wherever you need it. With a stylish stainless steel finish, it seamlessly integrates into any kitchen decor. Its Energy Star rating reflects its efficient power consumption, making it an eco-friendly choice. The interior layout includes removable shelving and a dedicated crisper drawer for fruits and vegetables, ensuring that your produce stays fresh longer.

The KBZU122TSS shares many features with its counterpart but may include additional customizable options or slightly varied designs, catering to diverse consumer preferences. This model emphasizes flexibility, allowing chefs to maximize their kitchen space without sacrificing functionality. The bright LED lighting inside provides excellent visibility, making it easy to find items even in densely packed storage.

Finally, the W10176789A is not just an accessory but a significant upgrade for your kitchen. This model is designed for seamless compatibility with various appliances, enhancing their overall performance. Whether it's improving temperature regulation or streamlining your cooking process, it has been engineered with precision in mind.

In summary, the KitchenAid KBZU series, featuring the KBZU242VSS, KBZU122VSS, KBZU122TSS, and the W10176789A, represents a range of high-quality kitchen appliances that prioritize efficiency, adaptability, and style. Their unique features and innovative technologies provide users with smart and practical solutions for all their cooking and cooling needs. Ideal for enhancing any kitchen, these appliances are a testament to KitchenAid's commitment to quality and design excellence.