Safety Notice
IF THIS BLAZE KING STOVE IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY RESULT. TO REDUCE THE RISK OF FIRE, FOLLOW THE INSTALLATION INSTRUCTIONS. CONTACT LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION INSPECTION
REQUIREMENTS IN YOUR AREA.
THIS INSERT IS SUITABLE FOR INSTALLATION IN EITHER:
-A FACTORY BUILT FIREPLACE LISTED TO UL 127 OR ULC S620.
-A
MANDATORY in CANADA, Recommended in USA
PLEASE READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR NEW ROOM HEATER. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.
This unit is certified by the United States Environmental Protection Agency. Certified to comply with July, 1990 particulate emissions standards.
The following statement is required by the Environmental Protection Agency: "This wood heater contains a catalytic combustor, which needs periodic inspection and replacement for proper operation. It is against the law to operate this wood heater in a manner inconsistent with operating instructions of this manual, or if the catalytic element is deactivated or removed. DO NOT operate this insert without a properly operating catalytic combustor."'
See pages 26 & 27 for Catalytic Combustor, Testing and Replacement.
CHIMNEYS: MASONRY FIREPLACE
In Canada: A code approved masonry chimney with a 6” listed stainless steel flue liner system and the accom- panying vent connector is required.
In U.S.A.: A code approved masonry chimney with appropriate vent connector extending from the flue collar of the stove to the first chimney flue liner and adaptor plate. A full length listed flue liner system with vent connector is recommended for all installations.
SAVE THESE INSTRUCTIONS
CAUTION: HOT WHILE IN OPERATION. DO NOT TOUCH. KEEP CHILDREN, CLOTHING AND FURNITURE AWAY. CONTACT MAY CAUSE SKIN BURNS. READ NAMEPLATE AND INSTRUCTIONS BEFORE OPERATING THE HEATER.
Page 4 | DATE PRINTED: 2/8/05 | Revision Date: 02/01/05 |