9 Fireplace Setup
A. Clean the Fireplace
Clean/vacuum any sawdust that may have accumulated in- side the firebox or underneath in the control cavity.
Note: Use only manufacturer’s supplied media for fuel bed layout.
B. Grate Assembly Placement
Back Legs in Grate Brackets
Figure 9.1 Back Legs in Grate Brackets (front view)
Figure 9.2 Top view
Ensure grate assembly is over burner assembly, centered from left to right, and back legs are in grate brackets.
C. Positioning the Logs See Section 13.B. for log descriptions and illustrations.
Figure 9.3 Right Rear Log (SRV720) (front view)
Figure 9.4 Top view
Place right rear log on the grate against the fireplace right side wall, so that its right end sits in the bracket opening.
Figure 9.5 Left Rear Log (SRV728) (front view)
Figure 9.6 Top view
Place the left rear log on the grate against the left wall and rest it on log.
Heat & Glo Lifestyle Collection • Dakota | 13 |