![](/images/new-backgrounds/1303956/30395625x1.webp)
Assembly Step 9
Locate these parts:
Door Handle Kit
Handle Spring
Handle Washer
Hardware Bag E
Mounting
Bracket
Tools needed:
Phillips head screwdriver
1
1.Slide the handle washer onto the end of the door handle, followed by the handle spring.
2.Feed the door handle into the hole through the front of the door panel.
3.From the back side of the door panel, insert the mounting bracket over the end of the handle.
4.With lock washers placed on the bolts, insert the bolts through the mounting plate, into the pre- threaded mounts and firmly tighten the bolts.
2
3
4
13