CFM Corporation 3405BG owner manual Hardware Bag Zip Tie Hook

Page 15

Assembly Step 11

Locate these parts:

Hardware Bag

G

 

Zip Tie

S-Hook

 

Using the zip tie, secure the hose to the front leg as shown. Do not pull the zip tie tight - leave it just loose enough so the hose can be adjusted if needed.

Tying the hose to the leg helps prevent the hose from coming into contact with the hot burner chamber. Inspect the installation underneath the smoker to ensure the hose is not rubbing any position of the burner cham- ber.

Tools needed:

Pliers

Crimp

OR

1.Place one end of the S-hook around the regulator neck or through the eyelet as shown.

2.Using a set of pliers, crimp the S- hook securely to the HVR so it can not be removed from the HVR.

3.When the LP tank is not at- tached to the smoker, use the S-hook to hang the HVR from the carry handle on the side of the smoker. This will help prevent dirt and other par- ticles from plugging the end of the HVR.

Assembly is now complete! Please follow all instructions and safeguards on the following pages for connecting the LP tank.

15

Image 15
Contents Gas Smoker Read ALL Instructions and Warnings Page Do not Return Your Smoker to the Retailer Call US First Identifying the parts Assembly Step Control Panel Assembly Burner Assembly Damper Plate Carry Handles Wood Chip Box Lid Wood Box Rack Water Pan Cooking Grids Tools needed Locate these parts Hardware Bag Zip Tie Hook Connecting the LP Tank Checking for Leaks Adding Water Pre-Use ProceduresCooking Tips Flavoring Wood Adding Wood / CharcoalLighting Procedure Ignitor Lighting System Shutting the Smoker OFF Cooking Tip Damper AdjustmentsCooking Instructions You Are Now Ready to Begin Poultry Temperature ChartCare and Maintenance After Use Safety and MaintenanceManufacturer’s Limited Warranty Page There’s nothing like Great outdoors Statement of CommitmentCFM Corporation