CFM Corporation 3405BG owner manual Carry Handles

Page 10

Assembly Step 6

Locate these parts:

2 Carry Handles

Hardware:

Hardware Bag D

 

1/4 Lock Washers

1/4-20 Nuts8 required1/4-20 x 5/8” Bolt 8 required

8 required

1.Align the carry handle with the corresponding holes on the side of the cabinet. The handles must be positioned upright with the bolt holes on the bottom.

2.Insert the bolts from the outside and thread the lock washers and nuts from inside the cabinet.

3.Firmly tighten the nuts.

4.Complete steps for both sides of the cabinet as- sembly.

Tools needed:

Phillips head screwdriver

1/2” Wrench

10

Image 10
Contents Gas Smoker Read ALL Instructions and Warnings Page Do not Return Your Smoker to the Retailer Call US First Identifying the parts Assembly Step Control Panel Assembly Burner Assembly Damper Plate Carry Handles Wood Chip Box Lid Wood Box Rack Water Pan Cooking Grids Tools needed Locate these parts Hardware Bag Zip Tie Hook Connecting the LP Tank Checking for Leaks Pre-Use Procedures Adding WaterAdding Wood / Charcoal Cooking Tips Flavoring WoodLighting Procedure Ignitor Lighting System Cooking Tip Damper Adjustments Shutting the Smoker OFFCooking Instructions You Are Now Ready to Begin Temperature Chart PoultryAfter Use Safety and Maintenance Care and MaintenanceManufacturer’s Limited Warranty Page Statement of Commitment There’s nothing like Great outdoorsCFM Corporation