![](/images/new-backgrounds/1303956/30395617x1.webp)
Assembly Step 5
Locate these parts:
Damper Plate
Hardware: | Hardware Bag C |
|
1 required
Tools needed:
Phillips head screwdriver
1/2” Wrench
1.Turn the smoker upright.
2.Set the damper plate on top of the cabinet and align it with the corresponding “butterfly” holes. One of the tabs will seat inside one of the holes.
3.Insert a bolt from the top through the center hole.
4.From inside, place a lock washer and nut on the bolt.
5.Thread the nut just tight enough to keep the damper plate snug. It should be able to rotate with little resis- tance.
Lock Washer
Nut
Bolt
Damper Plate
Cabinet Panel
9