CFM Corporation 3405BG owner manual Control Panel Assembly

Page 7

Assembly Step 3

Locate these parts:

Control Panel

Assembly

Hardware:

Hardware Bag A

 

1/4-20 x 5/8” Bolts

(2 remaining from previous step)

1.Place the control panel assembly between the front legs as shown. There are slots on the control panel that fit around the legs. The mounting tabs fit to the inside of the legs and line up with the bolt holes.

2.Be sure all the tabs on the back side of the control panel are cap- tured around the legs as shown below.

3.Insert the two (2) remaining bolts and tighten them securely .

Tools needed:

Phillips head screwdriver

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Gas Smoker Read ALL Instructions and Warnings Page Do not Return Your Smoker to the Retailer Call US First Identifying the parts Assembly Step Control Panel Assembly Burner Assembly Damper Plate Carry Handles Wood Chip Box Lid Wood Box Rack Water Pan Cooking Grids Tools needed Locate these parts Hardware Bag Zip Tie Hook Connecting the LP Tank Checking for Leaks Adding Water Pre-Use ProceduresCooking Tips Flavoring Wood Adding Wood / CharcoalLighting Procedure Ignitor Lighting System Shutting the Smoker OFF Cooking Tip Damper AdjustmentsCooking Instructions You Are Now Ready to Begin Poultry Temperature ChartCare and Maintenance After Use Safety and MaintenanceManufacturer’s Limited Warranty Page There’s nothing like Great outdoors Statement of CommitmentCFM Corporation
Top Page Image Contents