CFM Corporation 7000 owner manual Assembly Assemble the Pillar to Base, Tools needed

Page 10

Assembly Step 2 • Assemble the Pillar to Base.

tools needed:

3/8” open-end wrench 7/16” open-end wrench

Locate these parts:

base ( 1 )

Use hardware bag “A”:

1/4-20	1/4-20 x 3/4”
( 4 )	( 4 )

1.Lock the preassembled casters on base by pushing down on the latch.

pillar ( 1 )

10

Image 10

Contents

Model Series Table of Contents Formerly NowSeries 7000 Models Choosing a Safe Location for a Gas Barbecue Grill Not for USE by ChildrenPortable L. P. Gas Barbecue Grills GasTransporting a Full Cylinder Take These Instructions to the L.P. Gas Dealer Example a Filling a Type 1 Cylinder ValveAssembly Instructions Chapter Identifying the Grill Parts Assembly Step Unpack grill partsAssembly Assemble the Pillar to Base Tools neededYour grill will now look like this Assembly Attach the Grill Bottom Use hardware bag BMake sure the control-valve ends are Assembly Assemble the Grill Lid Page Assembly Attach the Side Tables to the Grill Assembly Install the Rock Grate and Briquettes No tools are neededAssembly Install the Cooking Grids Installing an L.P. Gas Cylinder No tools neededConnecting an L.P. Gas Cylinder Connecting the Regulator to CylinderModel 7000N Connecting to Natural Gas Installation for Natural GASOperating the QUICK-CONNECT To Disconnect the Fuel SupplyUse and Care Directions Chapter Leak Testing How to Check the Fuel-Supply System for Gas LeaksIgniter Lighting System Lighting InstructionsHOW to Shut OFF the Grill Match LightingTo Break in a NEW Grill Using Your Gas GrillControl Settings BURNER’S FlameReplacement Parts for Series 7000 Grills Main Hardware BagBottom/Burner Assembly consisting Breakdown of Preassembled Components