CFM Corporation 7000 owner manual Make sure the control-valve ends are

Page 13

Grill bottom as shown from below back.

4.

IMPORTANT:

6. Locate the two black lead wires

 

Make sure the control-valve ends are

beneath the grill bottom. Press the

 

inside the burner tubes extending

loose ends of the lead wires onto the

 

through the grill bottom. (See detail).

metal tabs located on the back of the

 

 

igniter unit.

5.

Insert four bolts into matching holes in

 

the grill bottom and secure with nuts.

Your grill will now look like this >

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
Model Series Formerly Now Table of ContentsSeries 7000 Models Not for USE by Children Choosing a Safe Location for a Gas Barbecue GrillGas Portable L. P. Gas Barbecue GrillsTransporting a Full Cylinder Example a Filling a Type 1 Cylinder Valve Take These Instructions to the L.P. Gas DealerAssembly Instructions Chapter Unpack grill parts Identifying the Grill Parts Assembly StepTools needed Assembly Assemble the Pillar to BaseYour grill will now look like this Use hardware bag B Assembly Attach the Grill BottomMake sure the control-valve ends are Assembly Assemble the Grill Lid Page Assembly Attach the Side Tables to the Grill No tools are needed Assembly Install the Rock Grate and BriquettesAssembly Install the Cooking Grids No tools needed Installing an L.P. Gas CylinderConnecting the Regulator to Cylinder Connecting an L.P. Gas CylinderInstallation for Natural GAS Model 7000N Connecting to Natural GasTo Disconnect the Fuel Supply Operating the QUICK-CONNECTUse and Care Directions Chapter How to Check the Fuel-Supply System for Gas Leaks Leak TestingLighting Instructions Igniter Lighting SystemMatch Lighting HOW to Shut OFF the GrillControl Settings Using Your Gas GrillTo Break in a NEW Grill BURNER’S FlameMain Hardware Bag Replacement Parts for Series 7000 GrillsBreakdown of Preassembled Components Bottom/Burner Assembly consisting