CFM Corporation 7000 owner manual Assembly Attach the Grill Bottom, Use hardware bag B

Assembly Step 3 • Attach the Grill Bottom.

tools needed:	hinge strut
3⁄8" open-end wrench
7⁄16" open-end wrench

Locate these parts:	heat
	shield
Use hardware bag “B”:

1/4-20 ( 4 )

heat shield

( 1 )

1/4-20 x 1”

( 4 )

back

grill bottom

( 1 )

1. Place the heat shield on the pillar, aligning holes as shown.

2.Position the grill bottom onto the pillar so that the rear hinge struts are toward the open side of the pillar, as shown.

3.Four holes in the grill bottom will align with the four holes in the heat shield and the pillar.

12