CFM Corporation 7000 owner manual Assembly Attach the Side Tables to the Grill

Page 16

Assembly Step 5 • Attach the Side Tables to the Grill.

tools needed:

3/8" open-end wrench

Use hardware bag “C”:

7/16" open-end wrench

Locate these parts:	1/4-20	1/4-20 x 3/4”
Locate these parts:	hex nut	bolt
	( 8 )	( 8 )
	side table
	( 2 )

1. Insert 3/4" bolts through holes in the support arms of the side tables.

2. Attach each side table to the four holes located in the side of the grill bottom using the locking hex nuts provided.

NOTE: Model 7500 has one RIGHT side table. Please refer to Model 7500 Assembly Step SB1 on page___ of this manual.

16

Image 16

Contents Model Series Table of Contents Formerly NowSeries 7000 Models Choosing a Safe Location for a Gas Barbecue Grill Not for USE by ChildrenPortable L. P. Gas Barbecue Grills GasTransporting a Full Cylinder Take These Instructions to the L.P. Gas Dealer Example a Filling a Type 1 Cylinder ValveAssembly Instructions Chapter Identifying the Grill Parts Assembly Step Unpack grill partsAssembly Assemble the Pillar to Base Tools neededYour grill will now look like this Assembly Attach the Grill Bottom Use hardware bag BMake sure the control-valve ends are Assembly Assemble the Grill Lid Page Assembly Attach the Side Tables to the Grill Assembly Install the Rock Grate and Briquettes No tools are neededAssembly Install the Cooking Grids Installing an L.P. Gas Cylinder No tools neededConnecting an L.P. Gas Cylinder Connecting the Regulator to CylinderModel 7000N Connecting to Natural Gas Installation for Natural GASOperating the QUICK-CONNECT To Disconnect the Fuel SupplyUse and Care Directions Chapter Leak Testing How to Check the Fuel-Supply System for Gas LeaksIgniter Lighting System Lighting InstructionsHOW to Shut OFF the Grill Match LightingUsing Your Gas Grill Control SettingsTo Break in a NEW Grill BURNER’S FlameReplacement Parts for Series 7000 Grills Main Hardware BagBottom/Burner Assembly consisting Breakdown of Preassembled Components