CFM Corporation A053041 owner manual Assembly Attach Legs to X-Frames

Assembly Step 2 - Attach Legs to X-Frames

Tools Needed:

Phillips head screwdriver

USE HARDWARE ”A”

A M6x15mm	B M6 Flat
Bolt (8)	Washer (8)

1.Attach the leg to the X-frame by inserting the top tabs into the corresponding slots in the X-frame as shown.

2.Line up the bolt holes on the side of each leg and insert a bolt into each of the bolt holes.

3.Tighten the bolts securely.

4.Repeat steps 1 through 3 above for each leg and frame. Be sure to match the correct leg component to its corresponding side, left/right.

When these steps are complete, you will have 2 sets of frames with legs attached.

LOCATE THESE PARTS:

X-Frame	X-Frame
with
Control
Panel

2Left Legs

2 Right

Legs

B

A

11