CFM Corporation A053041 owner manual Assembly Attach the Modesty Panel

Assembly Step 5 - Attach the Modesty Panel

Tools Needed:

Phillips head screwdriver

	7mm Wrench
USE HARDWARE ”D”
	B
A M4 KEPS	M4x15mm
Nut (6)	Bolt (6)

LOCATE THESE PARTS:

Tank

Heat

Shield

Modesty

Panel

1.Position the modesty panel between the front legs of the assembly. Align the mounting tabs with the bolt holes in the legs.

From the back side of the assembly, insert the

2.M4 bolts through each of the mounting holes and thread on the M4 KEPS nuts. DO NOT

yet insert the bolt indicated - it will be installed during a later assembly step.

A

B

IMPORTANT! The Tank Heat Shield must be properly installed to provide an additional precautionary safeguard.

3.Position the Tank Heat Shield between the front and rear x-frame assemblies as shown below.

BA

4.For each mounting hole, insert M4 bolts and thread on M4 KEPS nuts.

5.Securely tighten all the bolts. Remember to set aside the remaining bolt and nut for a later step.

14