Char-Broil 463250811 manual Natural Gas Bezel Screws Bezels Valve Stem

4

Pull the Burner Control Knobs off of Valve Stems.

Remove Screws and Washers that secure each Bezel to the Control Panel. Save removed Bezels for converting back to LP Tank Gas.

Install new Natural Gas Bezels provided with Kit (see illustration below) in place of old Bezels, on Control Panel and secure using previously removed Screws and Washers. Assure proper alignment with Control Knob before fully tightening.

Note: New Bezels will change the rotation for the Control Knob to properly control ignition and flames for your grill.

Press Control Knob back onto Valve Stems. Make adjustments to Bezels for free movement of Control Knobs.

Note: Replace only one Bezel at a time.

Natural Gas Bezel 80007893

Screws

Bezels

Valve

Stem

Main Burner Control Knobs

5

Insert Burners into Firebox Burner holes over Valves with port holes downward, making sure Burner engages Valve properly. See below diagram.

Secure Burners to Burner Brackets with previously removed Hitch Pins. Replace Carryover Tubes and secure with Hitch Pins previously removed. Reference illustration Step 2.

Tube Burner

Correct burner-to valve engagement Incorrect burner-to valve engagement

32