Leak Testing Valves, Hoses and Regulator
1.Turn all control knobs to the OFF position.
2.Be sure regulator is tightly connected to LP cylinder.
3.Completely open LP cylinder valve by turning hand wheel counterclockwise. If you hear a rushing sound, turn gas off immediately. There is a major leak at the connection. Correct before proceeding.
4.Brush soapy solution onto areas circled below.
Never remove threaded orifice at end of valve during leak testing of valves.
5.If “growing” bubbles appear there is a leak. Close LP cylinder valve immediately and retighten connections. If leaks cannot be stopped do not try to repair. Call for replacement parts.
Order new parts by giving the serial, model number and name and part number of items needed (see parts list) to the Grill Service Center at
6.Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
WARNING
For Safe Use of Your Grill and to Avoid Serious Injury:
Apartment Dwellers:
Check with apartment management to learn the requirements and fire codes for using an LP gas grill in your apartment complex. If allowed, use outside on the ground floor with a three (3) foot clearance from walls or rails. Do not use on or under balconies.
NEVER attempt to light burner with lid closed. A buildup of
Never operate grill with LP cylinder out of correct position specified in assembly instructions.
Always close LP cylinder valve and remove coupling nut before moving LP cylinder from specified operation position.
7