Assemble the Doors and the Tool Hook

Grill Assembly (continued)

NOTE: On some models, the Doors and the Tool Hook are pre- assembled at the factory.

1. Install both doors by first			2. Assemble the Tool Hook to
inserting the lower pin and the			the left door using three
upper pin in the hinge holes at			screws. Tighten the screws
the same time (Fig. 31).			with a screwdriver (Fig. 32).

Fig. 31			Fig. 32

2.Loosely engage the screws only several turns (Fig. 34). In the next step, the screw heads will engage slots in the doors from the outside before they are tightened.

3.Insert the screw heads into the slots in the outside of the door. The screws must be inserted in sequence. First, slide the short screw into the slot. The lockwasher must touch the screw head. Next, insert the long screw (Fig. 35).

PLEASE NOTE: Only the slender portion of the long screw will slide past the narrow part of the slot. This feature locks the shoulder screw in place.

Assemble the Doors Handles

1. Assemble two sets of handles with parts illustrated in (Fig. 33).

Fig. 34

Fig. 35

First

Last

Fig. 33

Lockwasher

Short

Lockwasher touches Screw Head

Shoulder

Narrow

part of Slot

screw

Long screw

with shoulder

4.Tighten both screws with a screwdriver. Access holes are provided on the inside of each door (Fig. 36).

Fig. 36