Grill Assembly
Assemble the Grill Lid
1. Hardware to attach the grill | 2. Carefully place the Grill Lid |
lid are two pins and hairpin | onto the grill frame in the |
cotters (Fig. 19). | closed position (Fig. 20). |
Fig. 27 |
| Fig. 28 |
Fig. 19
3.Insert each pin through the lid and windscreen (Fig. 21). Raise the lid slightly to help align the holes.
Fig. 21
Fig. 20
4.Carefully raise the lid to the open position (Fig. 22).
Fig. 22
Assemble the Propane Tank Retainer
1. Insert the ends of the Propane | Fig. 29 |
Tank Retainer into the holes |
|
| |
provided in the right side panel |
|
(Fig. 29). Use the pins |
|
provided with the Retainer to |
|
secure the Retainer in place. |
|
5.Install one hairpin cotter on each pin (Fig. 23).
Fig. 23
Assemble the Thermometer
1.Hardware to attach the thermometer are two wing nuts. Finger tighten the wing nuts on the inside of the lid. DO NOT OVERTIGHTEN
the wing nuts (Fig. 24 and 25).
|
|
|
|
|
Fig. 24 |
|
| Fig. 25 |
|
Assemble the Warming Rack
and the Grease Tray
Fig. 26
Assemble the Wire Shelf
1.Insert the ends of the Wire Shelf into the holes provided in the back panel. Use a screwdriver to attach the shelf to the base with two screws (Fig. 30).
Fig. 30
9