Coleman 7700 LP Gas Series, 7700 Series manual Cart, View of Grill from Rear

Ö

Step

7Ö

7-A

Assemble the Sliding Door into the tracks from the rear and set in the closed posi- tion.

No tools required for this step.

7-A. Position the Sliding Door as shown in 7-A.

Ö Assemble the Cart Spacer to the Grill Cart.

Step	Hardware shown actual size
8

	(TN)
M6 x 15mm Screw
	(4) Qty.
8-A	Cart
TN (x4)	Spacer

	7-B. Carefully align the
7-B
	rollers with the bottom
	door track. You will
	need to raise the lead-
	ing edge slightly to
	clear the Door Stops
	during assembly.

	7-C. Continue pulling the
7-C
	Sliding Door forward
	until the Door stops at
	the end of the Door
	Track.

	7-D. Carefully lower the
7-D
	front edge of the
	Sliding Door until it
	touches the magnets
	installed in Step 4.
	The door is now in the
	closed position.

View of Grill from Rear

8-A. Assemble one Cart Spacer between the Left and Right Panels using four Screws (TN).

ÖNOTE: The Cart Spacer is assembled with the flange down.

ÖTighten all fasteners.

8-B

TN

8-B. View of Cart Spacer properly assembled.

11