Coleman 7700 Series manual 32-C, 33-A, 33-B, Handle Long Spit Rod Slip Collar Set Collar Forkx4

32-C
	Follow this step
	with Short Spit
	Rod only!

Push Button to

Remove

Rotisserie Handle

32-C. When using the SHORT SPIT ROD, remove Handle immediately after placing Rotisserie into the Firebox. Since the handle is inside the Firebox, damage will occur if the Handle is not removed prior to cooking.

CAUTION

•DO NOT OPERATE THE GRILL WITH THE ROTISSERIE HANDLE ON THE SHORT SPIT ROD.

32

Ö Install the Long Spit Rod into the Firebox.

Step
33
33-A	NOTE:
	Machined
	Groove
	Toward
	Handle
Handle	Long Spit Rod
Slip Collar
Set Collar	Fork(x4)

33-A. Loosely assemble the Rotisserie parts as shown in Figure 33-A. Do not tighten the thumbscrews until properly positioned in the grill.

33-B
	Set Collar
Small Gap here
Center
Firebox
Wall	Slip Collar

33-B. Insert the Spit Rod into the Motor. Make sure the machined groove is toward the handle.

ÖPlace Slip Collar on Firebox Wall. Make sure the pointed tip of the Spit Rod stays in the Motor.

ÖPush Set Collar against the Slip Collar, provide a small gap to allow the Spit Rod to freely turn.

ÖTighten the thumbscrews on the Set Collar and the Forks to hold in place.