Coleman 7700 Series, 7700 LP Gas Series manual 30-A, 30-B, 31-A, 31-B

	Ö	Fasten one Door Handle to
		the Sliding Drawer.
Step	Ö	NOTE: M4 x 5mm Screws
		are factory installed into the
30		Handle.

ÖInstall the Sliding Drawer

and Front Cover Panel onto the Grill.

Hardware shown actual size

(EZ)

M4 X 5mm Screw

(2) Qty.

30-A

SLIDING

DRAWER

EZ (x2)

DOOR

HANDLE

30-A. Fasten one Door Handle to the Sliding Drawer with two Screws (EZ).

30-B	FRONT COVER PANEL
	SLIDING
	DRAWER

30-B. Install the Sliding Drawer and Front Cover Panel.

30

	Ö	Assemble the Motor Mount
		Bracket to the right outside of
Step		the Firebox.
	Ö	Assemble the Left Support
31		Bracket to the left outside of
		the Firebox.

Hardware shown actual size

(TN)	(DY)	(UO)
M6 x 15mm Screw	M6 Flat Washer	M6 Locking Hex Nut
(4) Qty.	(4) Qty.	(4) Qty.

31-A
UO (x2)	DY (x2)
	TN (x2)
Motor Mount Bracket

31-A. Attach the Motor Mount Bracket to the metal side panel using two Screws (TN), two Flat Washers (DY) and two Hex Nuts (UO).

31-B

Motor

31-B. Slide the Motor onto the Motor Mount Bracket.