Liquid Propane Gas Conversion Instructions
Tools Needed:
Phillips head screwdriver 1/4" nut driver *
9/16" wrench Adjustable wrench
* socket set with extension can also be used.
Be sure gas supply is off, the knobs are in the off position and the grill is cool.
1.Remove cooking grates and heat tents. (See Fig. 1).
2.Remove the screws holding the rear heat shield in place. Lift out rear heat shield and set aside (Fig. 2).
3.Remove the two screws holding each igniter in place (Fig. 3).
4.Lay igniters on floor of grill (Fig. 4).
Fig 1
Heat Tents
Rear Heat Shield
Fig 2
Screws
Fig 3
Screws
Fig 4
3