Coleman 9992-449 system manual Installing the L.P. regulator

Page 7

Liquid Propane Gas Conversion Instructions

Installing the L.P. regulator

28.Remove the NG regulator from the main gas pipe using an adjustable wrench. The NG regulator is located on bottom of grill

head (Fig. 17).

Note: For the following steps, the supplied pipe dope needs to be applied to all fittings before the fittings are attached.

29.Attach the 3/8" FNPT connector brass fitting to the main gas pipe (Fig. 18).

Pipe dope should not be used on any flared fittings!

30.Attach the main regulator hose assembly to the flared fitting (Fig. 19).

Fig 17

Fig 18

Fig 19

7

Image 7
Contents Liquid Propane Conversion Kit Liquid Propane Gas Conversion Instructions Tools Needed Screws Under lip Flex Line Gas Inlet Flex Line Manifold Screws You are now ready to install New LP manifold Pipe dope should not be used on any flared fittings Installing the L.P. regulatorConverting the Rear Infrared Burner to LP Label the Grill Installation is now complete Enjoy your grill safelyLiquid Propane Gas Conversion Instructions Liquid Propane Gas Conversion Instructions 9992-449 8/14/06